Feature

●EPEVER 10A MPPT solar Charge Controller , 12V/24V Auto Work , Max. PV input power:130W/12V, 260W/24V. Max PV voltage of 60V. Common Negative grounding. 2022 New Upgraded Tracer-AN MPPT solar charge controller, Better funcations and advanced technology , Support lead-acid batteries and Lithium Batteries :LiFePO4 (4s/12V; 8s/24V)； Li (NiCoMn)O2 (3s/12V; 6s/24V) . More Safety Protection.
●Advanced MPPT technology, with efficiency no less than 99.5% ,Ultra-fast tracking speed and guaranteed tracking efficiency,Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time ; Wide MPP operating voltage range,High quality components, perfecting system performance, with maximum conversion efficiency of 98%,Accurate recognition and tracking of multiple-peaks maximum power point
●International famous brands of ST and IRs components of high quality and low failure rate are used, which can ensure the products service life ,Charging power and current limitation function,
●Compatible with lead-acid and lithium-ion batteries,Battery temperature compensation function（only for Lead-acid battery）, Real-time energy statistics function,Overheating power reduction function;Multiple load work modes, The communication port adopts professional protection chip,With RS-485 communication bus interface and Modbus communication protocol.Monitor and set the parameters via mobile phone APP or PC software,Full-load operation without any drop in capacity within the range of working
●EPEVER Official Authorized Supplier (GolandCentury) , Any questions about solar system please feel free to ask technical services .

[Mt50]




[Mppt 20a]




[Mppt 10a]





Description

EPEVER MPPT Solar Charge Controller 10 Amp ,12V/24V DC auto work ,Max PV 60V , Solar Panels Max PV input 130W charging for 12V battery system or 260W charging for 24V battery system, Common negative grounding . Suitable for Lead-acid (Sealed / Gel(AGM) / Flooded); Lithium(LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V)) and User-defined .

Technical Data:

  • Model: Tracer1206AN
  • Rated charge and discharge current :10 Amp
  • Nominal system voltage:12V/24V DC auto work
  • Max. PV input power: 130W charge for 12V battery system / 260W charge for 24V battery system
  • Max. PV open circuit voltage:60V(at minimum operating environment temperature) 46V(at 25℃ environment temperature)
  • Battery type : Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V) , Lithium: LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V) and User-defined.
  • Battery voltage range : 8～32V
  • MPP voltage range:V(BAT+2V)～36V
  • Grounding : Common negative
  • Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
  • Working environment temperature : -25℃～+50℃(100% input and output)
  • Temperature: -20°C -- +70°C/-4°F -- 158°F
  • LCD backlight time : 60S (Default)
  • Controller Terminals:#12 AWG(4mm2) ; Recommended Wire cable:#12 AWG(4mm2)
  • Dimension:172*139*44mm ; weight :0.6 KG

Package List:

  • 1 X 10A MPPT Solar Charge Controller Tracer1206AN
  • 1 X Temperature sensor for controller（Model:RT-MF58R47K3.81A）
  • 1 X Manual (English)

Note :

Our warehouse in Chicago, Illinois, local team professional engineer supply solar system solutions and services for you in time .

(2022 Upgraded Version) EPEVER Tracer-AN series mppt solar charge controller, Better funcations and advanced technology .

Added Features :

  1. Blacklight LCD Display ,More Safety Protection ;
  2. Common Negative Ground ;
  3. Compatible with lead-acid and lithium-ion batteries too （Lithium battery automatic activation function）;

MPPT 10AmpMPPT 10Amp

Product Features:

  • Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;
  • With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;
  • All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;
  • The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;
  • This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.

Protection function :

  • •PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection
  • • Night Reverse Charging protection • Controller Overheating protection
  • • Battery Reverse Polarity protection • Battery Over Voltage protection
  • • Battery Over Discharge protection • Battery Overheating protection
  • • Lithium Battery Low Temperature protection
  • • Load Short Circuit protection • Load Overload protection
  • •TVS High Voltage Transients protection
Connection DiagramConnection Diagram

Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order >3. >2. >1.

  • Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.
  • DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .
  • If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)

How to program for Lithium Battery？ (You could watch the listing video tutorail and leave Q&A )

  1. Via Remote Meter (Accessories needed: MT50)
  2. Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U )
  3. Via Phone APP [ Android or IOS], (Accessories needed：WIFI adapter or BLE adapter )
  4. Software download website: EPEVER official website or read in manual .

Note: The following accessories devices are not included in controller box , you could check and purchase accessories separately .

MT50 BLE adapter Temp sensor cable RS485 Cable wifi adapter eLOG01
MT50 EPEVER-BLE-RJ45-A RTS300R47K3.81A CC-RS485-USB-150U EPEVER-WiFi-2.4G-RJ45-A eLOG01
Brand EPEVER EPEVER EPEVER EPEVER EPEVER EPEVER
MPPT 10A MPPT 20A MPPT 30A MPPT 40A Tracer6415AN MPPT 100A
MPPT 10A MPPT 20A MPPT 30A MPPT 40A MPPT 60A MPPT 50A
Rated Charge Current 10 Amp 20 Amp 30 Amp 40 Amp 60 Amp (No Load Terminal) 50 Amp (No Load Terminal)
Max PV Voltage 60V 100V 100V 100V 150V 15 0V
Max Array Solar Panel power 130W/12V; 260W/24V 2600W/12V; 520W/24V 390W/12V; 780W/24V 520W/12V; 1040W/24V 750W/12V; 1500W/24V; 3000W/48V 625W/12V; 1250W/24V; 2500W/48V
Battery Type Sealed, Gel(AGM), Flooded, User and Lithium Sealed, Gel(AGM), Flooded, User and Lithium Sealed, Gel(AGM), Flooded, User and Lithium Sealed, Gel(AGM), Flooded, User and Lithium Sealed, Gel(AGM), Flooded, User Sealed, Gel(AGM), Flooded, User
Grounding Common Negative Common Negative Common Negative Common Negative Common Negative Common Negative
Controller Terminal 12AWG(4mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 ) 2AWG(35mm 2 ) 6AWG(16mm 2 )
Recommended Cable Size 12AWG(4mm 2 ) 10AWG(6mm 2 ) 8AWG(10mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 )

Product information