Natural Mother of Pearl Backsplash Tile Seamless
All of Diflart mother of pearl tiles are natural and have not been dyed.
They are very similar on the surface, and both white with luste, but the back of dyed tile has more dark yellow chips.
Every pearl that is used for our tiles undergoes a hand selected process in which the Grade A Pearls are separated from the rest of the pearls before they are ready to be made into a tile.
|
|
|
---|---|---|
Flexible Application:These semaless white mother of pearl tiles can be bended to use in diverse spaces |
Excellent Performance:Moisture-proof, non-absorbent, non-fading, easy to clean, long service time |
Back Mesh Design & Easy Cut:You could cut it along the gap with scissors or if you want to cut the shell, a glass tile nipper is in needed. |
Each sheet covers 1 sq.ft. 10 sheets (1 box) cover10 sq.ft. The number of sheets you need = the number of sq.ft need to be decorated
Measure tape, ruler, glass tile nipper, utility knife or scissors,clean sponge, 3/16”trowel, gloves, applicator, set of caulking tools
Thin-set mortar or tile setting mat, non-sanding grout, sealer, tile caulk
Dry fit your tiles on the wall in the desired pattern using a pencil or dry erase marker to mark location and where to cut tiles to fit. If a straight line is desired, the shell chips can easily be cut with a glass tile cutter or nippers. The mesh back easily cut with a utility knife or box cutter.
Before applying your adhesive to the wall make sure that the surface is clean and flat. When putting adhesive on your surface make sure only to cover an area that you can set within 15 minutes. Using the trowel scoop out some adhesive and with the straight edge apply it evenly to your surface. We recommend a 3/16” trowel. Once the adhesive is applied to one section of your surface, switch over to the notched side and comb the adhesive keeping your trowel at 45 degrees to make sure the top of the adhesive has a consistent height.
Set the tile in place gently tapping it in with a grout float to ensure 100% adhesive coverage. After you place a tile be sure to insert your spacers to ensure uniformity. Clean excess adhesive before it dries on the tiles with a damp cloth or sponge.
You could use non-sanded, thin grout. and this Mother of Pearl tile does not require sealant.However, Mother of Pearl is a natural carbon form and will erode with acidic foods. Clean any spills or splatter immediately with a damp, nonabrasive cloth and a mild detergent.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
White Pebble Pearl Tile | Colorful Fish Scale Pearl Tile | Natural Pearl Tile | White Brick Pearl Tile | White Herringbone Pearl Tile | Whtie Seamless Pearl Tile | |
Thickness | 2mm | 2mm | 2mm | 2mm | 2mm | 2mm |
Color | White | Colorful | Light Colorful | White | White | Super White |
Material | Pearl | Pearl | Pearl | Pearl | Pearl | Pearl |
Package | 6 sheets | 10 sheets | 10 sheets | 10 sheets | 10 sheets | 10 sheets |