Feature

●? Premium Material: Small size ACS add-a-circuit fuse holder, plug into an existing fuse holder, 16 AWG wire lead is made of good quality ABS & copper wire, for new circuit adding additional fuse. Tin-plated zinc terminals for corrosion resistance and enhanced conductivity, protect your vehicles and your electrical device from a short circuit and overload.
●? Protects original circuit and provides a lead for new circuit. The fuse tap turns one slot into two slots, provides one fuse holder to protect existing circuit, and a second fuse holder to protect new circuit.
●? Package Included: Small Size Fuse Holder X 3Pcs; Fuse Puller X 1Pcs; Mini Fuses X 15Pcs ( 3 Kinds: 10A X 5Pcs, 15A X 5Pcs, 20A X 5Pcs).
●? Easy Installation: 1. Remove existing faulty fuse from the fuse box; 2. Insert a suitable fuse for the new accessory in to the top slot of the fuse tap; 3. Connection your new live wire to the insulated coupler butt connector on the fuse tap.
●? Application: This product allows you to obtain professional mounting accessories without cutting or splicing into the original current wiring. It makes your work easy and fast to add additional circuits for electrical Accessory such. 10A fuse is usually used on air bag, radio, clock, hands free, ABS, etc..; 15A fuse is usually used on extra jack, turn signal, cigar lamp, rear fog, hazard, etc..; 20A fuse is usually used on HAVC; 25A fuse is usually used on wipe.


Description

Specifications:
●Material: Tin-Plated Zinc + ABS
●Size: Small ACS
Total Length: 16cm
Cable Length: 14.6cm
Fuse Holder: 2.5X1.4X1.1cm
●Weight: 7.2g
●Colors: Black
●Package Included:
Fuse Holder × 3Pcs;
Blade Fuse ×15Pcs;
Fuse Puller × 1Pcs.

Blade Fuse Set Description and Note:
1. Transparent outer casing for quick detection of blown fuses.
2. High-quality Tin-plated zinc terminals, it is good for protect your vehicles and your electrical device from a short circuit and overload.
3. Different color coded to indicate ampere rating, which is easy to identify and distinguish.
4. With a fuse puller.
5. The size is just for reference, there maybe exist a measurement error, please check whether it fits your size before you buy it.
6. Color may vary slightly due to different calibration of each monitor.

Car Blade Fuse Replacement Steps:
1. Disconnect Power Source.
2. Check the fuse boxes.
3. Find and remove the blown fuse.
4. Select a same size, a same amperage of the fuse to replace it.
5. Install Add-a-circuit with the newly added fuse installed, back into the fuse block.
6. Reconnect power source, Turn on Ignition to test new accessory for proper operation.
7. If the accessory does not operate, turn the Add-a-circuit 180 degrees and reinsert into the fuse block. Retest again.

100% Satisfaction Guarantee:
●If the goods are defective or have other problems, please feel free to contact us by email.
●We will respond quickly to your questions.
●We will do our best to meet your needs.
●We can give you 100% money back if you are not satisfied with our products.
●We strive to offer you only the highest quality products and the best service, your satisfaction is our highest priority !!!