Feature

●?【Product】4 Axis nema23 stepper motor driver usbcnc controller kit; Model Number:23HS2430B/FMD2740C
●?【Stepper Motor】Nema23 57 type;Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft : Dual Shaft,8mm diameter; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue
●?【Driver】FMD2740C driver Voltage: DC12-50V; Driver microstep:128microstep;Current: rated maximum output reaches: 4A ; Subdivision precision 2 8 16 32 64 128 10 20 optional
●?【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software;
●?【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V;【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it.

Description

Package include:

4 x 23HS2430B Nema stepper motor 425oz-in 112mm 3A (Dual Shaft)
4 x FMD2740C stepper motor driver
1 x 400W 36V 11A DC switching power supply
1 x 4 Axis USBCNC breakout board
1 x Remote Hand controller
1 x USB Cable
CD include with English user manual,USBCNC software,activation code and register key.

Ps:

This cnc kit only support the USBCNC Software,not support with the Mach3 or other Softwares.

4 axis USBCNC breakout board with Hand control with USB Cable


Description: USB 2.0 interface Card input voltage: 15-36V; Limit port working voltage: 12V With Hand control box interface,external hand control box can use this interface to access the system, the interface is standard DB9 form; With manual speed control interface;	Can support limit switch Spindle control output interface: definitions turn for GND DIR PWM2 12V, respectively is ground,direction signal output, spindle 0-10V speed control signal output, 12V output. External pause and reset interface; the 2 feet marked PAUSE connect suspend switch, 2 feet marked RESET connection reset switch. Software MIST control relay output, software settings output marked 3, defined from top to bottom, 3 feet is NC, NO, COM. Software FLOOD control relay output ,output marked 2 in the software settings , defined from top to bottom, 3 feet is NC, NO, COM. Software SPINDLE control relay output , output marked 1 in the software settings , defined from top to bottom, 3 feet is NC, NO, COM	Wirings X/Y/Z/A axis stepper motor control signal output, the definition is CK+\CK-\DIR+\DIR-,respectively for pulse positive, pulse negative, direction positive ,direction negative, the board using anode common connection method, so CK+ and DIR+ linked together connect to the 5V on the board,this board does not support the common method.

FMD2740C Driver

Input voltage and Subdivision

Power supply voltage 12 to 50V DC
Subdivision precision 2 \ 8 \ 16 \ 32 \ 64 \ 128 \ 10 \ 20 optional
Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor;

Suitable

Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, cnc router machine, etc.

FMD2740C FMD2740C driver is suitable for driving small and medium-sized phase current is less than 4A 2-phase or 4-phase hybrid stepping motor. Due to the adoption of the new bipolar constant current chopper drive technology, using the same motor can output more speed and power than other drivers. Segments stepper motor running accuracy improved, reduces vibrations and noise reduction.

Characteristics

High-performance
High-speed optocoupler signal isolation input
Bipolar constant current chopping mode
20kHz chopping frequency
Electrical input signal is TTL compatible
Stationary current is automatically reduced by half
Shape design is convenient for installation

Wirings:

4 Wires

Stepper motors red wire connect to drivers A+ port
Stepper motors green wire connect to drivers A- port
Stepper motors yellow wire connect to drivers B+ port
Stepper motors blue wire connect to drivers B- port

General Specification:

Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ - 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature: 20deg-50deg

23HS2430B Nema23 Stepper Motor

Electrical Specification:

* Model Number: 23HS2430B

* Motor Type: Hybrid Stepper

* Step Angle: 1.8 deg.

* Holding Torque: 2.8Nm (425oz.in)

* Phase Resistance: 1.6ohms

* Rated Current/phase: 3A

* Inductance: 6.8mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 57 x 57 x 112 mm

* Body Length: 112mm

* Number of Leads: 4

* Weight: 1.8kg

Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length

400W 36V 11A DC Switching power supply


Specification Model: S-400W-36V Output Current:11A Output Voltage:36V Output Frequency:85% Output Power: 400W It comes with built-in cooling fan	Connection instruction L: Live wire N: Negative wire +V: DC power output “+” -V: DC power output “-“ +V ADJ: output voltage regulation	110V or 220V Input: 110-120V AC or 220-240V Please flip the side input voltage selector switch

Package include:

4 axis USBCNC breakout board with Hand control with USB Cable

Description:

Can support limit switch

Wirings

FMD2740C Driver

Input voltage and Subdivision

Suitable

Characteristics

Wirings:

4 Wires

General Specification:

23HS2430B Nema23 Stepper Motor

Electrical Specification:

Physical Specification:

400W 36V 11A DC Switching power supply

Specification

Connection instruction

110V or 220V

Wiring diagram

If you use windows 8 or windows 10 system,pls follow below steps to operate first then install our USBCNC driver & software.

Product information