Feature

●The Scanner was measured by an independent source and confirmed , Running at the desired output speed.
●Using the standard ILDA test pattern. Laboratory power supply at +/-15VDC,room temperature.
●Analog signal input impedance: 200K ± 1% Ω (differential input), 100K ± 1% Ω (single-ended input)
●Scanning speed:> 20Kpps
●Lens Reflectance:> 90% @ 45 ° incidence


Description

20K Laser Galvo Mirror Animation Laser Light w/ Editable + SD Card + Power Supply + Control Board

Specifications:

Power supply voltage: ± 12VDC
Analog signal input impedance: 200K ± 1% Ω (differential input), 100K ± 1% Ω (single-ended input)
Position output impedance: 1K ± 1% Ω
Position input scale factor: 0.5 V / °
Analog position input range: ± 5 V
Position compensation range: ± 2V
Position output scale factor: 0.5 V / °
Deviation output scaling factor: 0.5 V / °
Electronic temperature stability: 40PPM / ℃
Peak current: 4A
Average current: 1A (related to power, load and heat dissipation)
Working temperature: 0 ~ 45 ℃
Drive board size: 87mm × 58.5mm × 23mm
Scanning angle (mechanical angle): ± 20 °
Average current carrying: 1.5A
Small angle step response time: ≤0.35ms
Linearity: 99.0%
Proportional drift: 40PPM / ℃
Zero drift: 15 urad / ℃
Repeatability: 8 microradians
Scanning speed:> 20Kpps
Lens Reflectance:> 90% @ 45 ° incidence
Incident spot size: 1- 10mm

Package:

1 x 20K Laser Galvo Mirror Animation Laser Light w/ Editable + SD Card + Power Supply + Control Board