4- You can also use the other blue line which you can cut to any length for a faster setup for one bike or measurement.
5- On the metric side of the ruler 9 equals 90mm which is the same as 9cm.
Setting Fork Oil Levels
1- install the house with the tie adjuster to the syringe
2- Get your fork oil height from your manual in mm or inches
3-Using the ruler (metric on one side inches on the other ) measure from the end of the blue line to the zip tie. Slide the zip tie up or down the line to get your measurement
With the zip tie seton the fork tube you can remove oil. When it sucks air your level is set.
1 x 60ml Syringe
1 x 150mm Ruler
5 x Ties
2 x Soft Hoses
Material: Plastic + stainless steel
Color: White
Syringe Capacity: 60ml
Syringe Size (un-pull out): 15 x 2.9cm / 6" x 1.14"
Syringe Size (pull out): 24.2 x 2.9cm / 9.53" x 1.14"
Ruler Length: 150mm / 6"
Package Weight: 66g
Quantity: 1 set (9 pcs)
Adding and Removing Oil
1-You can adjust the tie on the syringe for repeat readings. With the small blue hose you can add oil through the air bleeder holes on some forks .
2- Dont limit this to just forks, uses this to add or remove oils from engines , transmissions , differentials, and so on. If you overfill, just remove the extra with your syringe .
3- ml or cc are the same ,10cc equals 10ml.