The original factory CUE screen design used a gel-based adhesive to bond the outer frame and the digitizer frame together.
Exposure to heat and sunlight causes this gel to harden and can no long properly transmit the touch signal from your finger to the system.
This causes many common symptoms such as erratic, or random touches, unresponsiveness, or a cracked spider web appearance.
|
|
|
---|---|---|
Gel Based Factory ScreenHere is the gel-based factory screen. This factory screen was in use for only 2 years and already has experienced the gel hardening and turning into powder, causing many touch issues. |
CUESCREENS Gel-Free ScreenAs you can see here, we do not use gel in the construction of our screens. This patent pending design results in many advantages over the original design. |
Improved Touch ResponseWith no gel to dry up and harden, you can be assured the repair is a permanent fix and you will experience a 50% increase in sensitivity and touch performance. |
|
|
|
---|---|---|
Anti-Glare CoatingAll CUESCREENS products have an anti glare coating that will provide a bright, visible image in direct sunlight. |
OEM Grade GasketsWe use a top quality silicone seal to prevent rattles or dust intrusion. |
Proximity Sensor SupportThe CUE system uses a proximity sensor to detect when your hand approaches the screen. All our products support proximity sensing. |
![]() |
![]() |
![]() |
|
---|---|---|---|
Basic | Premium | Premium+Tools | |
Gel-Free Design | ✓ | ✓ | ✓ |
Proximity Sensor Support | ✓ | ✓ | ✓ |
Anti-Glare Coating | ✓ | ✓ | ✓ |
HD+Scratch Resist Coating | ✓ | ✓ | |
Bezel Color | Black | Black | Black |
Compatibility | 2013-2020 CUE Units | 2013-2020 CUE Units | 2013-2020 CUE Units |
Trim Tools Included | ✓ | ||
Dual Mode (Works with all CUE) | ✓ | ✓ | ✓ |
Make sure you plug the ribbon cable all the way in! This is the cause of 90% of "Its not working."