Not all vehicles have an AIR system, but those that do use the technology to reduce tailpipe emissions. Depending on the vehicle, the AIR system may supply air to the exhaust manifolds, the catalytic converter, or both at different times. The additional air helps reduce harmful exhaust gases through oxidation. And the catalytic converter warms up more quickly when air is added to the exhaust manifolds.
A typical AIR system include:
Usually, when the engine is cold, the PCM commands the air management solenoids to direct airflow to the exhaust manifolds. Once the engine warms up, the module commands the solenoids to direct airflow to the catalytic converter. Note: There are also some systems that direct airflow exclusively to the exhaust manifolds.
As for the check valves, they typically operate in response to airflow and exhaust backpressure. Airflow from the AIR system will cause a check valve to open, whereas extreme exhaust backpressure (from a backfire, etc.) will force a valve to close.
Depending on the system design, there may be just one check valve or multiple check valves. Some check valves are exclusively passive devices, while others are operated by the PCM under certain conditions.
Your car’s primary computer, which is often referred to as the powertrain control module (PCM), monitors the operation of the AIR system. If the module detects a problem due to a faulty check valve, it will turn on the check engine light and store a diagnostic trouble code (DTC) in its memory. Common air injection-related DTCs include P0410, P0411, all through P0419.
The primary goal of the AIR system is to reduce tailpipe emissions. A faulty AIR check valve can block the flow of air into the exhaust stream, hindering the AIR system’s performance and causing vehicle emissions to increase.
The AIR check valve prevents reverse exhaust flow from entering the AIR system. If the check valve fails, hot exhaust gases can sneak back into the system, damaging components, such as the air pump and air management valves.