Feature

●Adhesive strips must be replaced every time the display is removed for repair or upgrade purposes.Removing the A1419 display on iMac requires cutting through the adhesive around the perimeter of the screen. After the adhesive is cut, it cannot be used to re-seal the display in place, so youll need to apply a new set of adhesive strips
●Before you start placing strips, remove all of the old adhesive. Use a spudger to scrape up an edge, then peel with your fingers.Remove all of the remaining adhesive strips from the iMacs frame and display glass.
●A1419 LCD panel adhesive strip kit (6 pieces) replacement included
●Please heating the adhesive strip before installtaion, to make sure the adhesive tape tightly stick to the liquid crystal.press the edge of panel and let the panel lay down for a few minutes.
●Professional Operation Only！We are not responsible for any damage during teardown.


Description

Display Adhesive Strips Set Replacement for iMac 27″

WillhomWillhom

Removing the display on a 2012-2020 iMac requires cutting through the adhesive around the perimeter of the screen. After the adhesive is cut, it cannot be used to re-seal the display. Our VHB (very high bond) adhesive strips keep your iMac LCD where it should be — on your iMac.

WHATS INCLUDED

  • LCD display adhesive strip kit (6 pieces)
  • Not including any other tools as pictures
  • These adhesive strips are designed specifically to perfectly fit the contours of the 27 inch iMac model A1419.
  • But will NOT work for the 21.5 inch iMac A1418 as there are thiner stickers designed specifically for that model
  • This product is designed to be consumed with use.
  • APN : 946-4547, 946-4548, 946-4549, 946-4550, 946-4551, 946-4552, 946-01031, 946-01032, 946-01033, 946-03774, 946-03775
  • Related PN : 076-00009, 076-1419, 076-1444

COMPATIBILITY

Compatible with iMac 27" A1419

  • iMac13,2 Late 2012: MD095LL/A (2.9 GHz Core i5)
  • iMac13,2 Late 2012: MD096LL/A (3.2 GHz Core i5) or (3.4 GHz Core i7)
  • iMac14,2 Late 2013: ME088LL/A (3.2 GHz Core i5)
  • iMac14,2 Late 2013: ME089LL/A (3.4 GHz Core i5)
  • iMac14,2 Late 2013: MF125LL/A (3.5 GHz Core i7)
  • iMac15,1 Retina 5K Late 2014: MF886LL/A (3.5 GHz Core i5) or (4.0 GHz Core i7)
  • iMac15,1 Retina 5K Mid 2015: MF885LL/A (3.3 GHz Core i5)
  • iMac17,1 Retina 5K Late 2015: MK462LL/A (3.2 GHz Core i5)
  • iMac17,1 Retina 5K Late 2015: MK482LL/A (3.3 GHz Core i5) or (4.0 GHz Core i7)
  • iMac18,3 Retina 5K Mid 2017: MNE92LL/A (3.4 GHz Core i5)
  • iMac18,3 Retina 5K Mid 2017: MNEA2LL/A (3.5 GHz Core i5)
  • iMac18,3 Retina 5K Mid 2017: MNED2LL/A (3.8 GHz Core i5) or (4.2 GHz Core i7)

Compatible with iMac 27" A2115

  • iMac19,1 Retina 5K Early 2019: MRQY2LL/A (3.0 GHz Core i5)
  • iMac19,1 Retina 5K Early 2019: MRR02LL/A (3.1 GHz Core i5)
  • iMac19,1 Retina 5K Early 2019: MRR12LL/A (3.7 GHz Core i5)
  • iMac19,1 Retina 5K Early 2019: BTO (3.6 GHz Core i9)
  • iMac20,1 Retina 5K 2020: MXWT2LL/A (3.1 GHz Core i5)
  • iMac20,1 Retina 5K 2020: MXWU2LL/A (3.3 GHz Core i5)
  • iMac20,1 Retina 5K 2020: MXWV2LL/A (3.8 GHz Core i7)
  • iMac20,1 Retina 5K 2020: BTO (3.6 GHz Core i9)
  • iMac20,2 Retina 5K 2020: BTO (3.8 GHz Core i7) or (3.6 GHz Core i9)

Remove the old adhesiveRemove the old adhesive

adhesive tape adhesive tape

top right stripstop right strips

Remove the old adhesive

  • Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure.
  • If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
  • After all the old adhesive is removed, carefully clean the surface with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
  • Dont skip this step, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

Lay out the adhesive strips

Lay out the adhesives strips beforehand so you wont accidentally install a strip in the wrong place:

  • Strip 11 on the top left
  • Strip 12 on the top right
  • Strip 13 on the right vertical
  • Strip 14 on the bottom right, dark side up
  • Strip 15 on the bottom left, dark side up
  • Strip 16 on the left vertical

Install the top and right adhesives

On the iMac Intel 27 inch Retina 5K Display, the top-right strip 12 blue tabs will not line up with the top antenna in the same way as the non-5K model. This is perfectly acceptable and wont impact the performance of the strips or antenna.

adhesive plasteradhesive plaster

adhesive plaster

lcd display panel repair tape tool lcd display panel repair tape tool
Remove the tape

  • To ensure a strong bond, carefully tip the iMac flat on its back (with the screen facing straight up) and press carefully but firmly around all four edges of the display.
  • Remove the tape securing the display to the rear enclosure.
  • Check the display after 24 hours to make sure that it is not loose on the iMac.

Use tape to temporarily secure

  • Use painters tape or masking tape to temporarily secure the bottom edge of the display to the iMacs enclosure.
  • The tape preserves the displays alignment, and allows you to safely swing the top edge of the display open to access the display cables.

a1419 adhesive tape a1418 adhesive tape lcd opening wheel repair tool a1419 power supply board
Adhesive Tape for imac 27" Adhesive Tape for imac 21.5" opening wheel for imac Electronics Repair Tool Kit power supply board for imac 27"
Compatible with imac 27" ✓ ✓ ✓ ✓
Compatible with imac 21.5" ✓ ✓ ✓
mac partsmac parts

Willhom

Committed to providing each customer with the highest standard of replacement and service.

Important information

To report an issue with this product, click here.