About Installation:
Step 1: If the mounting holes on the truck are not pre-threaded, you need to use a screw gun to drill the self-tapping screw into the hole, better take some oil on the screws and make the four holes threaded. Then remove all the screws.
Step 2: Bolt up the brackets with the screws.
Step 3: Find the 4 tie-down locations in the bed of the truck. (2 on each side)
Step 4:Take your BoxLink cleat, unlock it and line it up with the insert.
Step 5:Pull out on the bottom of the cleat, and slide the top insert up into place.
Step 6:Once in the desired position, use the special keys to lock the cleat into place.