Feature

●New SMD led turn Signal Brake light and Running tail Light all in one for motorcycle
●The Size of the Led Turn Signal brake Tail light is approx 7inches in length
●Total 48 led chip 8 Amber Turn Signal 32 Brake and Tail light 8Amber Turn Signals Each led light consists of 1 strip of super Bright 3528SMD chips
●These Led light strips are used for motorcycle
●Please note: Our this style are double led chip, the Brake light are 32LED (Please feel free to contact us if there is any problem.)

Description

LED Motorcycle Turning and Braking Signal Light are flexible LED light arrays for brake lights and turn signals built into one D-shaped tube. A variety of available size options makes them easy to install on a broad range of motorcycles built by different manufacturers. The pre-made Motorcycle Turns and Brakes are shipped with a dual-circuit element to make the center light work as a running and brake light and the turn signals to work like stock lights.

The motorcycle Turn and Brake light Features:

l 120 degree viewing angle 3528 LEDs for wider visibility.

l The LED board is in a D-channel tube that is 8in.(length) x 0.5in.(width) x 0.25in. (thickness)

l Industrial strength Self Adhesive Backing is a peel and stick.

l With 40 inch lead wire come out of one side of the tube

l Amber right & Amber Left turning light

l Running Light illuminates at 50% brightness on the whole strip

l Full 100% brightness as Brake light

l Input voltage of 12 Volts ~ fits Most All Motorcycles

Wiring & Installation:

- Light bar is a 5-wire hook-up: Running Light, Brake Light, Right Turn, Left Turn, & Ground

- Strip is Flexible ~ will conform to many surfaces

Package included :1pc Motorcycle LED Turn Signal Tail Brake Integrated Light

please note ,Our this style are double led chip ,the Brake light are 32LED ,total 48 led chip 8 Amber Turn Signal 32 Brake and Tail light 8Amber Turn Signals Each led light consists of 1 strip of super Bright 3528SMD chips Description : A: This Auction features a brand new SMD 3528 led turn Signal Brake light and Running tail Light all in one for motorcycle

B: The Size of the Led Turn Signal brake Tail light is approx 7inches in length Led are 3/16 of an inch Apart

C:32 SMD LED Total 8 Amber Turn Signal 32 Brake and Tail light 8Amber Turn Signals Each led light consists of 1 strip of super Bright 3528SMD chips ,this 3528 Led has 45-50lm which 2.5 times than the standard 3528Led chip ,Superb quality in a low-profile design ,the housing provides superior lighting performance ,waterproof ,never rust

D: These Led light strips are used for ,Trailer lights lots of common use

-SMD 3528 LED Light Turn Signal Brake light. High quality Flexible rubber to easy to mount to curved fenders and hard to mount places Add style and brighten your bike Super bright 3528 LED chip is 8 times brighter than original incandescent bulbs

F: Installs easily, Mount Almost Anywhere with tape Low temperature, Low Power Consumption, DC 12V & lasts up to 50k hours. Length: of Wires almost 48 inches

Specification : 1. Size of LED strips: 190mm*14mm 2. 5 wires: Black wire -- common ground; Red wire -- brake light; Yellow wire -- left turning; Green wire --- right turning; white wire --- Running packing


5 wires: Black wire -- common ground; Red wire -- brake light; Yellow wire -- left turning; Green wire --- right turning; white wire --- Running	Our this style are double led chip ,the Brake light are 32LED ,total 48 led chip 8 Amber Turn Signal 32 Brake and Tail light 8Amber Turn Signals Each led light consists of 1 strip of super Bright 3528SMD chips	super Bright 3528SMD chips ,this 3528 Led has 45-50lm which 2.5 times than the standard 3528Led chip ,Superb quality in a low-profile design ,the housing provides superior lighting performance ,waterproof ,never rust

Product information