Feature(may vary by option.)
●Stainless Steel Supply Line: Stainless steel braided construction for long lasting durability and burst proof
●Perfect Seal: Metal joint with rubber washers inside for better seal and no water leakage than plastic feeds
●Toilet Supply Line 7/8 x 3/8: Metric BSP 7/8" (G) female to US 3/8" female braided hose, this piece makes changing an old or leaking feed line very easy
●Easy to Install: It has a hexagonal section in both and increased bearing surface when adjusting the fitting with a wrench
●Flexible for Tight Spaces: 15 cm length will reach your application, make sure to measure your distance from toilet to valve
[6 Inch]
Description
This 3/8-Inch female compression by 7/8-Inch stainless steel nut connects your toilet tank to the wall water supply.
Product Description
Material: Stainless Steel
Hose Nut Material: Metal
Hose Lenght: 6 Inch (15 cm)
Nut Diameter
G 7/8" Female Thread ID=21.68 mm
US 3/8" Female Thread ID=13.11 mm
G 7/8" connects to the toilet tank
US 3/8" connects to the angle stop valve
How to Install
1. Turn off the water supply
Turn Off the water supply of toilet. Flush the toilet to drain water. If there is leak tighten the appropriate nut.
2. Remove old connector make sure you have correct length
Remove old connector hose and measure the length from toilet/sink to pipe.
3. Install toilet pipe
Screw the connector hose to 3/8" angle stop valve and 7/8" toilet fill valve, use a wrench to tighten.