Brand New needle bearing Steering Universal JointIt is always a good idea to replace the universal joint when doing any work on the steering system. Steering Universal Joints are manufactured using the highest quality materials available, and are built to handle the abuse from high horsepower applications. Replacing the universal joints is an inexpensive way to refresh the steering system. NOTE: When using more than two universal joints in a system, a support heim must be used. Features: Chrome Plated High strength needle bearings Built to handle the vibrations from racing applications Working angle up to 30 degrees High quality fasteners designed for better attachment and upgraded safety In order to determine which ujoint you will need, you can follow these steps: Determine which spline is on your steering box or rack. You can measure and count, or use the chart shown in images. Then, determine which steering shaft you have, or will need for your specific.application (3/4 Smooth, 3/4 Double D, or 1 Double D) If the ujoint in this listing isnt what you need, you can click here to see all of the other ones we have available NOTE: Increasing a UJoints angle of operation beyond 30Degree dramatically increases the stress on the joint, weakening the entire steering mechanism. If a greater angle is needed, add another ujoint.Needle bearing universal joints have the distinct advantage of lasting much longer than nonneedle bearing ujoints. Performance Online recommends only needle bearing steering u joints for use on street vehicles. Our joints are made of specially selected steel strength and longevity. The sealed precision needle bearings never need maintenance. Billet Steel Needle bearing ujoints outlast non needle bearing joints by a factor of 10 to 1. Needle bearing joi