Feature

●?Sound and light alarm -- When there’s a water leaking in some places like kitchen, bathroom..., the water sensor can detect water, and immediately prompt with real-time sound and light alarmto notify you.
●?Working principle -- The bottom of the sensor contains 4 highly sensitive gold-plated probes which set off the alarm. 2 of the 4 detection electrodes detect water, the water detector will alarm.The device red light flashes and give out bip bip sound.
●?Water-proof -- The detector will float if the leaking water is too full. Fully enclosed waterproof housing no need to worry water leak into the inner electronic parts. Dry the water stains to stop the alarm.
●?Widely used -- Used to monitor leaking water of e.g. leaking sink drain, leaking Central A/C, leaking washing machine hose, leaking hot water heater and a leaking hot water recirculating pump and other water prone areas.
●?Easy to use and Re-Useable -- No wires to hook up, flexible use.Before using this product, please gently pull off the insulation sheet and place it wherever you need to place it. one pcs can be used for a year under normal condition, dependent upon battery life. The battery can be changed when alarm sound is slow, Unscrew the fastening screws at the bottom of device to replace the battery.

[1]

[3]

Description

Hidden leaks can cause extensive damage and cost you many funds the health risk caused by the water leakage are truly nightmare scenario for inhabitants.This easy-to-install sensor will help give you and your family peace of mind. No wiring or heavy set up is required. The highly sensitive sensor can detect both pooling and dripping water sensors to offer the earliest possible warning,just put them anywhere you need.The alarm will sound once a leak is detected, and will sound for up to 10 hours or until the battery is depleted. The water leakage alarm will stop the alarm after leaving the water. Best of all, each alarm can be used again and again, simply dry off and replace the batteries when needed. If youre been looking for an effective way to stay ahead of leaks around your home, the Ourjob Water Leak Alarm is a household essential.

Installation location

Designed to be discreet, the water detector is compact. No wires to hook up,flexible use, ultra low power consumption.High sensitivity, fast response.Real-time sound and light alarm. Place this water alarm anywhere a potential water leak may occur Use it near sump pumps, plumbing, refrigerators, laundry rooms, dishwashers, washing machines, sinks, water heaters, toilets, garages, and basements. to help protect your home from potential water damage.

Alarm Placement

Place this water alarm a potential water leak on the floor or anywhere you need to place occur to help protect your home from potential water damage.

Real-time sound and light alarm

Once the unit has detected water, it will produce a very audible alarm for up to 10 hours depending on battery life and warning you instantly with a flashing red light and a buzzer.

Battery Replacement

Each alarm can be used again and again, simply dry off and replace the batteries when needed. Unscrew the fastening screws at the bottom of device to replace the battery.

Test Method

Place the water leak alarm on a wet towel, then the product will make a warning sound.
Pressing two or more metal poles on the foot of the water leakage alarm by hand will alarm.
An alarm will occur when the leak alarm is placed on a table or floor with water.

Characteristics

Waterproof light and buoyant
Ultra low power consumption
Real-time sound and light alarm

Specifications

Power Supply: DC3V battery cell(CR2450)
Battery Dimensions: D1in, H0.1inch
Static Current: <1.0uA
Alarm Current: 30mA~70mA
Static Time: ＞1 years
Alarm Duration: About 10h
Alarm: Sound&light alarm
Dimensions: 2.4(D)*1.7(H)inch

Features & Precautions

When 2 neighboring s detect water, it will probe alarm .The device red light flashes and give out bip bip sound.
Let the sensor away from water, it will enter standby mode.
Unscrew the fastening screws at the bottom of device to replace the battery.
Ambient temperature range from -25 ℃ to +85℃.
The equipment has a waterproof function. When encountering a lot of water, the water leakage alarm will float on the water surface and issue an alarm.
Avoid using in environments with chemical or flammable gases, saturated smoke, high humidity or other abnormal environments for a long time.
Installed in place absence of rain and snow, the medium have no enough gas and dust to corrode metal and damage the insulation. Also no danger of explosion
Before using this product, please gently pull off the insulation sheet, do not pull hard to prevent the seal ring from being pulled out.