Feature

●All New Gooseneck Air Hitch with 9" Extension - Smoother Safer Towing: Improves your ride, reduces wear & tear on pickup & gooseneck trailer. Helps eliminate tugs, jerks & bumps felt when towing on rough roads or concrete highways
●Installs in Minutes: Completely replaces your factory stem & coupler with the Gooseneck Surge Air system & coupler. Shock absorbing cushion hitch & coupler cushions ride & helps eliminate road shock felt when towing
●Air Ride Technology: Protects your truck, gooseneck trailer and the contents with a smoother, safer tow. For heavier loads, just add air. This Shocker absorbing gooseneck air hitch directs the tow resistance through an airbag, cushioning the road bumps & jerks producing a smooth ride & towing experience
●30,000 lbs towing & 6,000 lbs tongue weight rating. Comes with a patent pending 30K dual latching shift lock? coupler for 2-5/16 inch hitch ball. Extends coupler 9" forward. Great for pulling Gooseneck with short bed pickup trucks
●Includes complete replacement gooseneck inner stem, gooseneck surge air hitch system with 30,000 lbs 9" extension air coupler. Made in the USA by Shocker Hitch (Make SURE You Pick Correct Inner Stem Size & Pin Type)

[Round 4 -Angled Pin 10-20° 30K Coupler 9 Forward]



[Round 4 -Blank No Pin 30K Coupler 9 Forward]



[Square 3-15 | 16 -Top Crank 30K Coupler 9 Forward]



[Square 4 -Straight Pin 30K Coupler 9 Forward]



[Square 3-15 | 16 -StraightPin 30K Coupler 9 Forward]



[Square 3.5 -Blank No Pin 30K Coupler 9 Forward]



[Square 4.5 -Straight Pin 30K Coupler 9 Forward]



[Round 4 -Straight Pin 30K Coupler 9 Forward]



[Square 4 -Top Crank 30K Coupler 9 Forward]



[Round 3-15 | 16 Angled Pin 30K Coupler 9 Forward]



[Round 3-15 | 16 -Straight Pin 30K Coupler 9 Forward]




Description

Gooseneck Stem & Pin Selection GuideGooseneck Stem & Pin Selection Guide

Round Gooseneck Stem & Pin Selection Guide

Tube Size can vary from 100mm (3-15/16") to 4" in diameter. Measuring through pin holes can usually tell the size. If slightly less than 4" its a 100mm (3-15/16" stem).

If Angled on a metric 100mm (3-15/16″) then the pin angle is greater than if it is angled on a 4″ stem. Straight pin holes is least common. 4″ round with angled pins is most common. If it has a bulldog sticker, it is a 100mm angled. If you are not sure, message us a picture of your stem

Gooseneck Stem & Pin Selection GuideGooseneck Stem & Pin Selection Guide

Product information

Size:Round 3-15/16" -Straight Pin 30K Coupler 9"Forward