Feature

●Powerful Must Have Tool: Z Automotive’s Tazer is a smart, intuitive module that allows controllability over dozens of features on your Jeep so you can truly personalize your driver experience - on or off-road.
●Simple Learning Curve: This unit is a true plug-and-play design with your Jeep’s Secure Gateway module and features are easily navigated using your Jeep’s steering wheel controls.
●No Hassle Updates: Programming takes only moments and free firmware upgrades are available when needed simply by connecting the module to a computer with the included mini USB cable.
●Key Advanced Off-Road Settings: If you crawl rocky terrain, air down for beach running and surf fishing, control your intrusive TPMS system by disabling or making thresh hold adjustments to the alerts for your tires psis from 25 - 85.
●Disconnect sway bar on Rubicon equipped models up to 30 mph. Cooldown mode allows your fan to keep running in accessory mode.
●Made in USA


Description

001001

Tazer JL/JT Lite Programmer

Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL and Jeep Gladiator.

Tazer JL Lite features can be broken into three categories:

11

11

33

Vehicle Settings

Vehicle Settings are accessed with the engine OFF and the ignition in the “RUN” position. These are changes made to the Jeep such as tire size, gear ratios, or settings that accommodate other upgrades. These changes will continue to operate after the Tazer JL Lite is unplugged.

Live Functions

Live Functions are accessed with the engine ON. These are operations the Tazer JL Mini performs live, only while it is physically connected. plugged in.

“Non-Menu” Live Functions

“Non-Menu” Live Functions are not located in a menu. They are activated automatically or with a steering wheel button combination. These are operations the Tazer JL Lite performs live, only while it is physically connected.

  • Light Show – 6 preset and 3 make-your-own light shows that flash all the exterior lights – perfect for car shows/first responders/off-road visibility – controlled from key fob or steering wheel buttons – can be enabled in-motion for use in parades, off-road and for legal police/EMS applications (contact support for more info)
  • Read and clear DTCs system-wide or in specific modules
  • Change tire size
  • Change gear ratio (max 4.11 on 4XE)
  • Change Transfer Case LOW ratio
  • Enable/disable TPMS system
  • Set TPMS pressure warning limit, front and rear, between 25psi and 85psi
  • One-touch return-to-stock – quick “Unmarry” function returns to stock

  • Activate Light Show
  • Define Winch Mode RPM (excl. 4XE)
  • Flash lights to indicate tire pressure while filling
  • Dark Mode – turn off all exterior lighting and dash/radio/shifter lights while parked with the engine running
  • Activate and cycle through camera inputs
  • Display Vacuum/Boost Gauge
  • Activate 0-30 timer
  • Activate 0-60 timer

  • AutoStopStart Disable – Tazer JL Lite will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle
  • Disconnect the sway bar in 2WD up to 30mph
  • Cooldown Mode – turn on engine fans on-demand
  • Winch Mode – raise idle RPM to user-selected value between 1250 and 2000 (excl. 4XE)
  • Line Lock – lock the front brakes for an easy burnout
  • Rock Crawl – lock all four brakes with a steering wheel button combo to hold the vehicle still, especially helpful when off-road (excl. 4XE)
  • Lock all four brakes in park to anchor Jeep (shortcut) (excl. 4XE)
  • Partial reboot
1 blaster 013 1
JT Front Camera Kit JK Blaster Programmer Tazer Programmer Tazer JL and JT Mini Programmer
Brand Z Automotive Z Automotive Z Automotive Z Automotive
Type Camera Blaster Tazer Tazer
Compatible with 2020+ Jeep Gladiator (and Wrangler 4XE/392) Jeep Wrangler JK 2007-2018 Jeep Grand Cherokee 2014-2021 - Dodge Challenger 2015-2021- Dodge Charger 2011-2021 - Dodge Durango 2014-2021 - Chrysler 300 2011-2021 Jeep Wrangler Gladiator 2018-2022
brand banerbrand baner

Product information