Feature
●Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen tools when they become dull over time. Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning.
●Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw.
●Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to produce much cleaner cuts and tends to be easier to use than standard styles of turning tools. The cutters will NOT fit on mini versions of carbide turning tools.
●These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the Savannah 3 piece cutter set may work with many other brands of carbide turning tools that you may already have in your shop. This cutter set comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the screws that came with your turning tools to properly secure these cutters.
●We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. This pack also includes 2 screws for securing the cutters to the tool. Please note: the screws in this pack may or may not properly fit your turning tool. This means you must use the screws that came with your original turning tool. Set includes the CUTTERS ONLY: 1 each round carbide cutter, 1 each square carbide cutter and 1 each diamond shaped carbide cutter.
Description
Razor sharp, easy to install 3 pc carbide cutter set
When our turning tools need to be sharpened we all have to bit the bullet so to speak and sharpen our tools Not only is the sharpening process time consuming, its truly just downright boring. If you own carbide tipped turning tools, like the Savannah 3 piece large carbide set, then you know how convenient and easy to use this type of tool is to use in comparison. Not only is this type of tool easy to use, when the cutter dulls you simply loosen the screw and rotate the cutter to a fresh, sharp edge! Once the cutter is completely used up, simply purchase another economical 3 piece cutter set!
Fits Savannah Carbide Turning Tools and Most Every Other Major Brand!
These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the Savannah 3 piece cutter set may work with many other brands of carbide turning tools that you may already have in your shop. This cutter set comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the screws that came with your turning tools to properly secure these cutters on to your current brand.
Different Profile Cutters for Multiple Turning Applications
|
|
|
|
|---|---|---|
Round Carbide CutterRound cutters are primarily designed for finishing cuts, especially on inside curves of bowls and spindles. This cutter shape also works well for shaping and hollowing bowls. |
Square Carbide CutterSquare cutters are generally used for roughing out material and for that reason they are sometimes referred to as a rougher tool or cutter. They are ideally used on flat or convex surfaces and they remove more material than the round or diamond shape cutters. |
Diamond Shape Carbide CutterThe diamond shaped carbide cutter is designed for putting the final details on your project such as small beads and coves on both spindle and bowls. Along with the lighter detail cuts, this cutter shape can also be used for roughing, finishing and cutting chuck tenons. |
Razor Sharp Edges
The great thing about carbide cutters is that when an edge gets used and becomes dull, all you have to do is rotate the cutter for a fresh, clean, razor sharp edge!