This single D permanent roof anchor is designed to provide one D-ring anchorage points when securely installed on a wood roof sub-surface or vertical wall. Made of stainless steel plated D-ring. Accommodates single user for fall protection. Confined space and fall from height hazards. Meets all applicable OSHA, ANSI and CSA standards. Measures 14-Inch length by 5-Inch width by 3-Inch height.
This single D permanent roof anchor is designed to provide one D-ring anchorage point when securely installed on a wood roof sub-surface. Made up of 304 stainless steel with a zinc plated steel D-ring and 8-galvanized steel nails. The anchor can be applied during new construction or retrofitted into the design of finished roofs with asphalt shingles, shakes or tiles. The RA41 is nailed securely across the ridge opening and the roof is finished, overtop of the RA41, with the roofing materials and ridge vent. Only the D-ring is left exposed for a quick and safe connection. Must be used in conjunction with a shock-absorbing lanyard, that will limit fall arrest forces to 900-Pound. Measures 15-4/5 Inch length by 3-2/7 Inch width by 1/2 Inch height.