SAFETY PRECAUTIONS:
1. Do not use the device, if protective shields are removed.
2. Before any work on device, firstly switch off power supply.
3. Before turning on, firstly take a firm grip.
4. During work always use appropriate individual protection equipment and follow occupational safety regulations applicable for worked material.
5. Due to hazard caused by sanding,always use individual protection equipment (including protective gloves, earmuffs, goggle, masks, etc.) required pursuant to applicable regulations on accident prevention.
BEFORE OPERATION, FIRSTLY CHECK, IF:
- Air valve is in MAX position;
- Hose and compressed air fitting is in good condition;
- Valve lever is operative - before connecting the device to compressed air supply.
- All components have been properly installed and are free of damage.
- Device is connected to compressed air supply.
MAINTENANCE:
Before maintenance, firstly disconnect the device from power supply. After work finish, or if necessary, dean the body and remove dust with compressed air.
Lubrication shall be carried out on regular basis (every 50 h) by injecting 2/3 droplets of specified oil type (silicone free synthetic oil, ISO 32) into compressed air connection, when device is in vertical position, with connection upwards. After lubrication, connect the device to power supply and operate for a few seconds. Before long-time stoppage, firstly lubricate the device according to above guidelines.