Feature(may vary by option.)

●🚗【APPLICATIONS】2014+ Polaris RZR XP 1000, 2015+ Polaris RZR Trail 900, 2015+ Polaris RZR High Performance S 900, 2015+ Polaris RZR Trail 900 XC , 2013+ Polaris Ranger
●🚗【SPECIFICATION】4 PCS 1.5" Thickness | 4x156mm to 4x156mm Bolt Pattern | 131mm Hub Bore | M12x1.5 Threaded Studs.
●🚗【PACKAGE INCLUDES】4 x Wheel Spacers (1.5" per unit), 2 x High Strength Thread Locker (red), 2 x User Manual.
●🚗【BENEFITS】(I) CNC automatic processing ensure high accuracy and stability(0.02mm) (II)6061-T6 aluminum forged alloymaterial. (III)High quality pre-installed heat treated 12.9 grade studs. treated 12.9 grade studs.
●🚗【WARRANTY】All Richeer products are covered by the Richeer two (2) year warranty to be free of defects in material and workmanship for two years from date purchased.

[2 inch - 12x1.5 Studs]




[1.5 inch - 12x1.5 Studs]





Description

1111
11231123

1111
Wheel Spacer Specifications

  • Quantity: Four (4)
  • Thickness: 1.5" (38.1mm)
  • Bolt Pattern: 4x156mm
  • Center Bore: 131mm
  • Stud/Nut Thread Pitch: M12x1.5

Compatible with:

  • 2014+ Polaris RZR XP 1000
  • 2015+ Polaris RZR Trail 900
  • 2015+ Polaris RZR High Performance S 900
  • 2015+ Polaris RZR Trail 900 XC
  • 2013+ Polaris Ranger

11

BENEFITS:

Each of products are precision machined using only the latest in metal fabrication technology and anodised during production to protect against the elements, ensuring a lifetime of dependability under even the most extreme riding conditions.

11

1

22

2

33

3

44

4

1111
363363

Installation Procedure

11

22

33

Step 1:

  • Following your vehicle owners manual, proper raise the vehicle and support it using adequately load-rated jackstands.
  • Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, dont continue with this installation.
  • Remove any wheel visible rust from the mating flange on the vehicles rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.

Step 2:

  • If proper seating can be achieved, apply provided thread locker to vehicles studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • DO NOT USE AN IMPACT WRENCH.

Step 3:

  • Check that wheel and tire clearance allow for full steering(lock-to-lock).
  • If there is no interference, vehicle may be lowered.
  • Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.

Product information