Stained Glass Window Film Privacy
Installation Tips:
· Clean: Please check whether you clean-up all the dust on the glass.
· Cut: It will stick better if the privacy window film size is slightly smaller than the window.
· Hair dryer: It is recommended to heat the glass film with the hair dryer first if the indoor temperature is low or in winter.
· To prevent shedding and bubbles, there should be 1/10" gap between the edge of glass and the window film.
Q&A
----------------------------------------------------------------
Q:How to prevent bubbles during the sticking process?
A:In the process of sticking, do not directly remove the separation layer at once, you can tear off the separation layer while sticking the flat surface. (In the sticky process, you can also use a ruler or a box to push flat)
----------------------------------------------------------------
Q: Why the window film fall off?
A:
- The clear backing of the film is not peeled off.
- You didnt clean the windows thoroughly. There are caked some dirt or paint left on the glass.
- The film and the window are not wet enough. Or, the water and air bubbles under the window film are not smoothed.
- The blade or the knife for cutting the film is not sharp, resulting in deformation at the edge of the film