Pin Diameter: 7.9mm
Fit hole diameter: 7.9mm
Material: Plastic
Color: Transparent
●Clear plastic exterior looks great
●Used to support and lock in 3/4 inch thick shelves
●Note: Please confirm that the shelf thickness is less than 20mm before purchase
●For a tight fit effect, the holes diameter should be equal to or slightly smaller than the pin diameter (slightly less than or equal to 7.9mm)
●Self-Locking Shelf Support Pegs - Easy to install, make the shelves securely stay in place you put them
●Easy to release - Just press the spring loaded clip, and then you can take down the shelves
●Widely used in cabinets, wardrobe, closet, bookshelf, shoebox, and racks
●Easy to Use - Just install or uninstall it by hand, good choice for DIY
●Note: Small parts, please stay away from your baby and children
Package included:
20 x Plastic Locking Shelf Pins
How to use
1. Use an electric drill to punch hole, please use the 7.9mm drill bit.
2. Put the shelf pin in the hole.
●Warm note: If the hole diameter is bigger than shelf pin diameter, you can wrap a circle around it with scotch tape, and then put the shelf pin in the hole
3. Place the baffle on the shelf pin.