Feature

●Specification: Cutting edge diameter (CED): 0.9mm; cutting edge length: 9.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
●Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
●Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
●High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
●Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment

[1.3mm Green]

[2.2mm Cord Blue]

[0.9mm White]

[1mm Olive Green]

[1.9mm Light Purple]

[1.1mm Orange]

[1.7mm Hot Pink]

[2.5mm Lawn Green]

[1.6mm Orange]

[0.6mm Brown]

[0.7mm Light Orange]

[0.8mm Gray]

[1.5mm Light Blue]

[1.4mm Hot Pink]

[2mm Orange]

[1.2mm Blue]

[1.8mm Lawn Green]

Description

Micro Drill Bit for PCB, Acrylic, Plastics

Tungsten Carbide Tip

Made from ultra-fine grain carbide material for precise and easy experience, high hardness, good toughness, wear resistance, high strength, resistance to bending.

Spiral Flute Bits

Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal.

High Precision

With sharp cutting edge, milling groove and clean surface. PCB drill bits have good milling and cutting performance. Can work quickly and cleanly, no glitches or scrap left.

Features

Can ensure high work efficiency.
Carbide can run at higher speed than high-speed steel.
High speed steel shank provide high hardness and good toughness for wear resistance.

Wide Applications

Suitable for drilling and engraving PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center.

Carbide PCB Drill Bits replace your CNC machines and any hand held tool. Large drill bit chip space, chip resistance, chip smooth, small drilling heat.

Tips

The drill bits are too tiny, so it is very fragile for handling. Use vertically and take good control of your CNC speed.

The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.