![Under Desk Black Cable Raceway](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Please Read In Detail Before Purchasing
Made of carbon steel, totally weight 1.4kg, Hollow curved design cable management tray under desk which can used for a long time, and large capacity can hold more power strip and computer charger, solved most of problems for your cable management.
TWO INSTALATION WAYS:
Installation without perforation : Suitable for desk thickness Within 0.59inch(1.5cm)
Hole-punching installation : Suitable for desk thickness Beyond 0.59inch(1.5cm)
Q1: Does this adhesive is strong enough or not?
A1: Normally, This adhesive will last a long time, you need to apply it correctly (stick it to the round hole of the wire channel and place the surface of the wire channel above the table and not below it).
Q2: How can I remove the adhesive without damaging the table?
A2: If you want to remove it, do not tear it off directly. Please use a hairdryer or heat gun to soften the tape first (not too hot) and then tear it off slowly to prevent tearing the tabletop. If for some reason, there is still glue residue, we recommend rubbing a few drops of olive or vegetable oil or hot water on it and then wiping with a cloth. This may have to be repeated once or twice. We do not recommend using other solvents.
Q3: Does my table with thick of 1.8inch(4.5cm)suit this tray?
A3: If you want to use a non-porous installation, you need to check that your table is less than 0.98inch (2.5cm) thick first, only tables below this thickness are suitable for non-porous installation. So if your table is 1.8inch (4.5cm), it is recommended that a perforated mounting method will be more stable.