The Salter Brecknell BL6702100615L 6702U15 Point of Sale Scale has a capacity of 15lb., a readability of 0.005lb., an accuracy of ≤0.01%, a 6 x 10 inch (W x D) stainless steel weighing pan, an external display with LCD, and five selectable weighing units for retail and commercial weighing tasks. (W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The external display has operating keys, a 15mm high, 5-1/2-digit LCD with backlight for visibility, and a 9" long cord that connects the display to the scale. It can be removed from the scale for remote use, and can be mounted on a bracket or tower (sold separately). This scale has a bidirectional nine-pin RS-232 port and a USB port for connecting to compatible electronic cash registers and POS software (sold separately). Its checkweighing, countweighing, and peak/hold functions allow for comparative measurements. The scale has alternate calibration points that allow calibration at less than full capacity weight. Leveling is performed by manually adjusting the feet until the air bubble is properly centered in the level indicator. The scale comes with a 120V AC adapter and can also be powered through the USB port (cable sold separately). Point of sale scales are used to determine product weight in retail and commercial settings.
SpecificationsCapacity x readability15lb. x 0.005lb., 15lb. x 0.1oz., 240oz. x 0.1oz., 7.5kg x 0.002kg, 7,500g x 2gAccuracy≤0.01%Weighing unitsPound, pound per ounce (not NTEP approved), ounce, kilogram, gramDisplay5-1/2-digit LCD, 15mm highBuilt-in applicationsCheckweighing, countweighing (not NTEP approved), positive peak, negative peak, average hold, auto holdInterfaceBidirectional nine-pin RS-232, USB portInterface protocolsNCI, ECR (electronic cash register), 8213 (Sharp), 2250 (Swintec), ATT, 0400 (Olympia)ComplianceNTEP (National Type Evaluation Program) 13-074, Measurement Canada AM-5912C, UL (Underwriters Laboratories), CE (European Conformity)Operating temperature range-10 to +40 degrees C at up to 90% RH (relative humidity)Power120 VACWeighing pan152 x 254mm/6 x 10 inches (W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Balances and scales are measuring instruments used to determine the mass and weight, respectively, of an object. Unlike a balance, a scales accuracy is affected by gravity and must be recalibrated if it is relocated. In practice, the terms balance and scale are frequently used interchangeably, and the results are displayed in a variety of units, such as gram (g), ounce (oz), pound (lb), troy ounce (ozt), pennyweight (dwt), carat (ct), momme (mom), grain (GN), and tael (tl). The empty weight of a container used to hold objects (tare weight) on the balance or scale is removed prior to weighing, so that the scale reads zero with the container in place. The precision of both balances and scales is determined by the requirements of their intended use, and can be 0.0001g or better for analytical balances. Precision is verified and maintained with periodic calibration. For commercial use, scales and balances may be certified by organizations such as NSF International and National Type Evaluation Program (NTEP). Balances and scales may include data interfaces that allow connection to a computer, printer, or remote display. Balances and scales are made suitable for the environment in which they are used with protective housings, sealed keypads, and lighted displays. They may have built-in functions for tasks such as pill counting in pharmaceutical applications, postage calculations in shipping applications, or weight-totaling in warehouse applications. Balances and scales are used in a wide variety of applications and accommodate a wide range of weights.
Avery Weigh-Tronix manufactures weighing systems and equipment under the Avery Weigh-Tronix, Brecknell, Dillon, and Railweight brands. The company, founded in 1731 and headquartered in Smethwick, UK, is a subsidiary of Illinois Tool Works (ITW).