[12inch(300mm 300W)]
This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates.
Specification:
Size:12inch(300mm 300W)
Voltage: 110V
Frequency: 50/60Hz
Power: 300W
Maximum Bending Width: 12in(300mm)
Heating Thickness: 0.04" – 0.24" (1mm - 6mm)
Package Weight: 6lb
Out Package Size: 24.02x6.10x5.12inch
The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet.
You can also use many acrylic bender heaters to heat more bents at the same time.
|
|
|
|
---|---|---|---|
Power SupplyUpgraded power supply, multi-barrier heat dissipation, safety protection. Also Power supply and water pipe are connected at both ends respectively. |
Silicone Tubes |
Water Pump DetailHeat-resistant high-temperature water pump, imported silicone material water pipe. |
Heating TubeThere is water circulation cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed. |
Acrylic: 210℃(410℉)
Perspex: 195℃(383℉)
PVC sheet: 155℃(311℉)
ABS: 190℃(374℉)
PET: 160℃(320℉)
NOTE: Just for reference, and users may modify them according to their materials and working habits.
The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater.
Advantage:
This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates.
Features:
1.Temperature adjustable- Product temperature is uniform, water circulation cooling.
2. Portable - Light and practical. Space-saving, hot bending of plastic sheets of various materials, such as thickness more than 6 mm
3. Can be heated up and down simultaneously by two heaters
4. Can be combined with multiple heaters to heat multiple bending points at one time;
5. There is water circulation cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed.
6. Power supply and water pipe are connected at both ends respectively. Hydropower separation is safe and intuitive, easy to plug and pull, convenient to collect, and easy to assemble with the workbench.
|
|
|
|
---|---|---|---|
|
|
|
|