Feature
●WIDE RANGE OF COMPATIBILITY: Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. The brackets will fit any device with a thickness between 14 mm and 22 mm (or 9/16" and just short of 7/8"). Some thicker devices/cases may also fit if they have tapered edges. Many devices can be used with protective cases left on (if total thickness is under 22mm)
●2 SETUP OPTIONS WITH INCLUDED PARTS; Incredibly simple, damage-free setup with 3M Command Adhesive strips rated to hold up to 5 lbs each. Alternatively, setup with included screws and anchors for scenarios where a more heavy duty setup is required
●ACCESSIBLE PORTS: The Koala Mount 2XL was specifically designed to leave as much space open as possible on the sides and bottom of the device so that ports will still be as accessible as possible on a wide range of devices, however, please check the dimensions in the photos and compare to your specific device to determine suitability
●BUILT-IN CORD CLIPS: There are 2 different styles of cord clip integrated into each bracket. The side clip is a temporary clip that is super easy to use and is meant for holding your cord while the mount is not in use. The bottom clip is a semi-permanent clip designed to hold your cord at all times
●PERFECT FOR BEDSIDE AND HEADBOARD: The Koala Mount 2XL is perfect for using to charge your phone safely in the bedroom without taking up valuable nightstand space. Attach it to the side of a nightstand, directly to the headboard, or to the wall, for a convenient charging spot, clock, and alarm.
Description
Koala Mount 2.0 XL
Phone with bulky case (thickness: 20 mm)
Multi-Surface, Dual-Optioned Mounting
Included with your purchase are two mounting options: 3M Command Strips and Screws / Anchors. The strips allow for damage free setup and removal, require no tools, and adhere to most smooth, flat surfaces. The screws and anchors are ideal for more heavy-duty needs and will secure your mount to rougher, tougher surfaces.
How it Works
The Koala Mount 2.0 XL consists of two small, sturdy plastic brackets that are set up on the wall independently, allowing you to space them out as needed for your specific device and orientation. The 2 brackets gently cradle your device, which rests in the pocket created, utilizing gravity to hold it in place.
Package Contents:
- 2 ABS plastic brackets
- 2 self-drilling drywall anchors
- 4 screws
- 2 Large Command strips
- 1 surface prep pad
- 8 spacer pads
- Instructions
|
|
|
|
|---|---|---|
CompatibilityThe use of two sturdy, independent plastic brackets means its width conforms to your needs. Whether mounting in portrait or landscape mode our mount will match the width you need. The brackets form a pocket that best fits devices with thicknesses between 14mm and 22mm (which in inches is between 9/16" and just short of 7/8") Note: For devices with a thickness of less than 13 mm, we highly recommend the Koala Mount 2.0 which is specifically designed for devices with a thickness up to 13 mm. |
No Fallen Cords, No Covered ButtonsWith built in cord clips and precise side cut-outs, the Koala Mount 2.0 XL doesnt compromise your devices functionality. Youll need to double check the port locations on your device against the dimensions, but with many devices youll be able to charge, power on, and adjust the volume of your device all while in the mount. When youre ready to take your device out again, the cord-clips are there to keep your charger in place. |
Rubber Spacer PadsThe Koala Mount 2.0 XL comes with spacer pads designed to discreetly fill extra space between your device and the brackets, creating a tighter fit. This allows for skinnier devices to fit safely and securely. Rubber spacer pads included:
Note that if your device is less than 13mm thick, youll get a better fit with the Koala Mount 2.0, instead of this XL model. |
Convenience Where You Need it Most
- Dont Stop the Music!
If youre in the throes of another Serial binge, but still have to get ready in the morning, use your Koala Mount 2.0 XL to keep your phone out of harms way and still play your favorite Podcast, song, or watch your favorite TV Show.
- Bedside Docking Station
You can use your mount as an easy charging dock. Its perfect to keep your phone at your side for late-night Netflix binges, alarm clock apps, or to simply keep your phone within arms reach.
- A Helping Hand in the Kitchen
Use your mount in the kitchen to hold up your recipe while you prepare. Its the perfect prep helper, keeping your device easy to see and out of the way.
- Stay Entertained... and In Shape!
Make your exercise routine something to look forward to. Stay up-to-date with your favorite videos, TV shows, and movies all while sticking to your workout goals.
|
|
|
|
|
|
|---|---|---|---|---|---|
| Koala Mount 2.0 XL | Koala Mount 2.0 | Koala Mount (Screw-In) | Koala Mount (Adhesive) | iPad Bed & Lap Stand by iProp | |
| Colors | Black | White or Black | White or Black | White, Black, or Chrome | Black |
| Compatible Thickness (Range) | 14 to 22 mm | 13 mm | 11 mm | 11 mm | 17 mm |
| Spacer pads for tighter fit | ✓ | ✓ | |||
| Damage-free Adhesive Mounting | ✓ | ✓ | ✓ | ||
| Screw/Anchor Mounting | ✓ | ✓ | ✓ |
