Feature

●Fitment: 2006 - 2010 Chrysler 300 2.7L 3.5L, 2007 2008 Chrysler Pacifica 4.0L, 2007 2008 2010 Chrysler Sebring 2.7L, 2008 - 2010 Chrysler Town & Country 4.0L, 2008 - 2010 Dodge Avenger 2.7L and so on. You also can use the Amazon finder part check this Throttle Body Air Control will fit you vehicle.
●OEM Replacement Number: 4861691AA 4861694AA.Please reference your old Electronic Throttle Body to check it.
●Item-condition: Complete Throttle Body Assembly - Includes Throttle Actuator, Idle Air Control and Throttle Position Sensor
●Function:Electronic throttle body is the throttle pedal and throttle body between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear
●HOWYAA throttle body We are promise Within 1 year if have any damage will send the replacement. if have any question（Such as electric throttle body control actuator fails, cracks, stops working or any other problems,）, please contact with us, we will solve it for you. please dont worry and feel free shopping. thank you.


Description

throttle bodythrottle body

About HOWYAA Throttle Body

  • HOWYAA Electronic Throttle Body Assembly with IAC TPS 100% Brand New In Factory Original Package. Not refurbished or re-manufactured part. The electronic throttle unit opens and closes the throttle blade based on input from various engine control sensors, including the accelerator pedal.
  • Function:Electronic throttle is the throttle pedal and throttle between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear.
  • Notice: the item from factory with OEM quality, so the quality can be assured, if the product you received doesnt work, please help feedback.

2010 300 throttle body2010 300 throttle body

4861691AA 4861691AA
Description:

  • 100% Brand New
  • Direct Replacement 100% factory new.
  • Built to strict quality control standards
  • Direct replace Professional Installation is Highly Recommended

  • Please confirm the part number and vehicle models before order.

Specification

  • 1. Brand New Throttle Body 2005-2012 Jeep Grand Cherokee; 2006-2010 Chrysler 300; 2008-2010 Dodge Grand Caravan
  • 2. Part Number: 4861691AA 4861694AA
  • 4. Replace for OEM number: #4861691AA 4861694AA
  • Notice: the throttle body from factory with OEM quality, so the quality can be assured

  • Package Includes: 1 x Throttle Body as pictured
  • 4861691AA 4861694AA
  • This is a compatible replacement part manufactured by HOWYAA.
  • This throttle body is NOT a genuine part. Vehicle makes and their associated vehicle models and part numbers are used in this listing only to identify the vehicles this throttle body fits.

FITMENT:

  • 2005-10 Chrysler 300 V6 3.5L
  • 2005-10 Chrysler 300 V6 2.7L
  • 2007-08 Chrysler Pacifica V6 4.0L
  • 2007-10 Chrysler Sebring V6 3.5L
  • 2006-10 Chrysler Sebring V6 2.7L
  • 2008-10 Chrysler Town & Country V6 4.0L
  • 2008-10 Dodge Avenger V6 3.5L
  • 2008-10 Dodge Avenger V6 2.7L
  • 2008-10 Dodge Grand Caravan V6 4.0L

Install Steps:

  • Remove the air cleaner and duct hose assembly using the common screwdriver. Disconnect the electrical connector on the mass air flow by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.
  • Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out. Disconnect the throttle position sensor opposite the throttle cable levers.
  • way open by hand and then removing the now slackened cables from the throttle lever.
  • Remove the heated water hoses from the bottom of the throttle body if there are any (this is vehicle dependent). Use the needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Pull the hoses off. Not all vehicles have these, although there are a few that do.
  • Remove the four bolts running through the throttle body and into the intake manifold. Use appropriate ¼-inch drive socket and ratchet. Lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body and components in reverse order of removal.

Aboout HOWYAA factory

HOWYAa throttle bodyHOWYAa throttle body

throttle body throttle body

throttle dodythrottle dody

HOWYAAHOWYAA

Produce Machine

  • Video Measuring Machine
  • Three-coordinate Measuring
  • Torsion Tester

All are Through dynamic high and low temperature test,thermal shock,endurance test,salt spray test,vibration test and loading test in the car to insure the reliability of our new products.

Item Offerd

management,enterprise form a unique production process,one-flow production through finish machining,punching press,injection,assembly,etc.,ensure company full realization of “high efficiency”, “high precision” and “high productivity”,and with solid manufacturing capability provide customers convenient and immediate product requirements.

Product Storefront

There are Updated Technoloy,Expanded Applicability,Longer lift time, Strong Stability.

HOWYAA

Zhejiang HOWYAA Electronic Control System Co.,Ltd. was founded in 1983,

HOWYAA is a hightech enterprise focusing on the R&D, production and sales of engine management system products,the companys main products related to switches, sensors, idle air control valves, electronic throttle bodies.

Product information