Feature
●【Installation note】 Suitable for 12-14 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:12"(300mm)--Fully extended length:23"(582mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.
●【30 Years service life】Equipped with hydraulic spring rebound device inside,which take 100,000 times of rebound tests without damage.These push-to-open drawer slides are different with our another “with soft close function ”one. You need to push a little harder to lock the slide when you close the drawer,so they dont bang shut loudly also.
●【Push to Open drawer slides】 With a push to release mechanism, the drawer pops open automatically with just a light push on the front plate of drawer,which release your hand when busy in cooking or carrying and without bending over to open and close the drawer beneath cabinets so long as your knees touch it.
●【Detachable & 3-Fold full extension】There is a black plastic buckle on the back of the slide rail, the 3rd track(the narrowest section) can be separated by pressing it, which mean the drawer can be installed and detached by your will easily; 3-Fold full extension, which designed to extend your drawer to a full open position so that you can access anything in the drawer without reaching under the lip of your cabinet.
●【Large load bearing & Anti-rust】The drawer slide is made of high-density 1.2x thick cold-rolled steel and with Industrial grade solid steel bearing ball inside，both of which make the bearing capacity of slides be up to 45kg/100lb. The special electrophoretic surface treatment prevent the air from directly contacting the rail steel plate,which improve the anti-rust ability and oxidation resistance effectively.
●【Installation note】 approx. 0.38 inch reserved space is needed for the front cabinet door for the push to open mechanism. In other words, there should be a buffer distance that allow the drawer to be pushed inward about 10 mm,which make the hydraulic rebound device work to give a bounce back force to drive the drawer open.
[20 Inch]
Description
