Feature

●【Double Power】Using a special cable, you can connect two Honda EU2200i, or two Yamaha EF2000i generators together to get double the output. (Please note: you can only parallel two identical units together.)
●【Application】Honda Generator, WEN56200i, 56310i, 56225i, 56203i, Westinghouse iGen2200
●【Advantages】Enjoy the advantages of inverter generators such as lower noise level, easier portability and higher fuel efficiency at the same power output compared to conventional generators
●【Weather Resistant】Generator cables are designed to withstand elements such as wind, rain, snow, soil, and rocks, and are durable enough to keep you powered through hurricane season. Be prepared for power outages, hurricanes, typhoons, tornadoes and snowstorms.
●【Warranty and Service】Atima promises 12-month warranty, if you have any questions, please feel free to contact us.


Description

paralle kitparalle kit

Application:

Honda inverter generator. This cable can parallel two Eu2000i or Eu2200i without using Companion.

Wen 56200i 56310i 56225i 56235i 56203iSuper Quiet 2000 inverter generator.

Generac 7117 Gp2200I W 50St Inverter, Orange

Westinghouse iGen2200 inverter generator

Ryobi2300 inverter generator

Smarter Tools STAP-2000iQ, 1600 Running Watts/2000 Starting Watts, Gas Powered Portable Inverter

Parallel Output and Overload Lights:

NOTICE

If using the paralleled generators to power an electric system that is grounded(i.e. household wiring), both generators will need to be grounded. Using#10 AWG bare copper wire (not included)ground the generators from the ground connector on the generators to a standard grounding rod(not included)that has been driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven copper or brass rod (electrode)which can adequately ground the generators.

1.Please refer to your generators user manual for indicator light and power output status of your generators.

2.If the generators are overload, remove all electrical loads from the generators by disconnecting all eletrical applicances from the 120V twist-lock on the parallel kit and then determine and correct the cause of the overload.

3.To reset the overload light you may need to power down both generators and allow the units to cool.Cooling time will vary with ambient temperature.Follow restart procedure for both generators.If cooled enough, the generators will produce power again.

Powering down the generators:

1.Turn off all electrical appliances connected to parallel outlet.

2.Unplug the appliance power cord from the 120V twist-lock parallel receptacle.

3.Power down generators as instructed in user manual.

4.Disconnect the pin connectors and ground connection from the two generators.

Notice

Make certain that the engines of both generators are off and have stopped running,BEFORE disconnecting these cables.

Safety Instructions:

Follow all safety and operating instruction for proper use.

NEVER connect or disconnect the parallel kit cables from the generators while running.

The load requirement of the electrical appliance cannot exceed the combined continuous output of the paralleled generators. Please refer to your Generator(s)user manual for specifics.

This parallel kit cannot be used for paralleling three or more generators or running two different brands of generators.

Keep away from water. Do not use when wet. Keep children and pets away from cord.

AVOID OVERHRATHING. Do not cover cord with any material.