Feature

●Open End Dome Head Pop Rivets (Blind Rivets)
●All 304 Stainless Steel Construction for Long Lasting Applications - Excellent Corrosion & Rust Resistance
●Rivet Diameter: 1/8 inch (#4, 0.125 inch)
●Flange Diameter: 1/4 inch (0.250)
●Drill (Hole) Size: #30 Bit, 1/4" Hole (0.129 - 0.133)

[100 4-5 | 1  & 8   x 5  & 16   Grip (0.251 - 0.321)]




[100 4-2 |  1  & 8   x 1  & 8   Grip (0.063 - 0.125)]





Description

  • Domed head rivets are used when there is no access to the blind side of the two materials
  • Most common rivet
  • IFI 114 Compliant
  • Used to join two materials together quickly
  • After mandrel breaks off domed head is left exposed
  • Made of corrosion resistant stainless steel

Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets. Rivets have a two piece construction; one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use. Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed. Rivet size and grip range is measured in installed length. IFI 114 Compliant.

Stainless Steel Pop Rivets

pop rivetspop rivets

installed pop rivetsinstalled pop rivets

stainless steel rivetsstainless steel rivets

18-8 Stainless Steel

Blind rivets in this selection are made entirely of stainless steel, meaning that both the hat and mandrel are 18-8 stainless steel. 18-8 Stainless is the fastener industry standard for stainless steel, and is corrosion and rust resistant in applications exposed to the elements.

Blind Rivets

Blind rivets (commonly called pop rivets) their name because of their function. Blind rivets are commonly used in applications where a bolt and nut will not work because there is only access to one side of the materials being fastened.

Domed Head

Standard pop rivets leave behind a smooth domed head. During installation, the mandrel snaps off as it is pulled through the body of the rivet on the blind side of the application.