Feature
●【Application】Compatible with John Deere tractors and combines, keeping your equipment running smoothly for a long time. Fits for JD models 3010 3020 4000 4010 4020 4320 4520 4620 4230 4430 4630 8430 4040 4240 4440 4640 4840 8440 (4050 W/466 ONLY) 4250 4450 4650 4850 8450 4055 4255 4455 4555 4755 4955 4560 4760 4960, and fits for many more AG & Industrial equipment that using the 270 404 466 6076 7.6L 8.1L engines.
●【High Performance】Equivalent to JDG476 JDG477 JDG478 ST-198 and JT30040B. Designed to simultaneously install the Teflon unitized seal and wear sleeve on the engine rear crankshaft flange.
●【Custom Upgrade】Helps easily and quickly replace new seals, works with seal OEM number: RE520036, DZ111672, RE530121, RE504363, RE524227, RE22764, AR34682 and AR30382.
●【Superior Material】Made from highest quality steel for great strength, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure long-term service.
●【100% Satisfaction Guarantee】If youre not satisfied with our Crankshaft Rear Seal Wear Ring Installer Tool, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!
Description
Great Compatibility:
This JDG476 JDG477 JDG478 seal installer tool fits for JD models 3010 3020 4000 4010 4020 4320 4520 4620 4230 4430 4630 8430 4040 4240 4440 4640 4840 8440 (4050 W/466 ONLY) 4250 4450 4650 4850 8450 4055 4255 4455 4555 4755 4955 4560 4760 4960, and fits for many more AG & Industrial equipment that using the 270 404 466 6076 7.6L 8.1L engines.
Works with Seal OEM number: RE520036, DZ111672, RE530121, RE504363, RE524227, RE22764, AR34682 and AR30382.
Please make sure the model and part numbers match your application.
Powerful Function:
Used to easily replace and install the crankshaft rear oil seal and wear sleeve, saving your time and energy.
Compatible with John Deere tractors and combines, keeping your equipment running smoothly for a long time.
Superior Material:
Constructed with high quality carbon steel
Surface with black finish, resisting rust and corrosion.
With great strength and durability for long term reliable service.
|
|
|
|
|---|---|---|
|
Crankshaft Rear Oil Seal and Wear Sleeve (Not Includes) Seal (A) and wear sleeve (B) are assembled. DO NOTSEPARATE. If parts become separated, discard and replace with a new assembly. (Attempts to reassemble will cause the wear sleeve to damage the seal allowing engine oil to leak past seal.) Oil seal/wear sleeve assembly MUST BE installed with the JDG476(85) Crankshaft Rear Oil Seal Installation Tool Set for correct installation to avoid leaking. |
Installing Crankshaft Rear Oil Seal/Wear Sleeve without Removing Engine Step 1. Apply a light coating retaining compound around the leading edge of crankshaft flange and wipe away extra sealant. Step 2. Install JDG477 (85) Pilot (A) on end of crankshaft using the Allen head cap screws (B) supplied with toolset. Tighten cap screws securely Step 3. Carefully start oil seal/wear sleeve assembly (C) overJDG477 (85) Pilot and crankshaft with open side of seal toward engine. |
Crankshaft Rear Oil Seal/Wear Sleeve Installed Step 4. Position JDG478 Driver (A) so that hole in the cross plate goes over threaded stud of pilot. Install washer and nut on stud. Step 5. Tighten nut to draw JDG478 Driver in until crossbar bottoms on JDG477 (58) Pilot. When the tool bottoms, seal and wear ring assembly (B) will be correctly positioned. Step 6. Remove JDG476 (85) Tool Set from engine. |
