Feature

●Package include: 4PCS 50W 6ohm Load resistors and 8Pcs T-Taps. Mounting screw not included.
●Not designed for consistant working bulbs( Day time running light, fog light, headlight LED bulbs). Resistors may become very hot to melt plastic parts nearby.
●Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
●Design for low power turn signal LED bulbs. Not recommended for other LED bulbs.
●You may connect the wires with the splice taps provided(quick but maybe not solid). Or you may cut the wires and connect them more solidly.


Description

Package Include: 4Pcs (2 Pairs) 50W 6 ohm Load resistors with 8Pcs T-Taps. Mouting screw not included. Please do your research before purchase about what kind of load resistors you need for your car: 3ohm, 6ohm or 9ohm. Those are 50W 6ohm resistors.

Description:
Since LED lights dont have much resistance your turn signal will flash very fast if you do not use load resistor. They add resistance and slow down the blink back to normal.

Voltage: DV 12V
Height: 2.2cm（0.86inch）
Length: 5cm(1.96inch)
Weight: 31.47g(1.1oz) per led resistor
Operating temperature: -25 degrees Celsius to +275 degrees Celsius

Solution for "bulb out signal" or "OBC error message" after installing SMD LED light bulb
Solution for fast turn signal blinking response after installing SMD LED light bulb

Important:
They got extremely hot, please mount them steadily onto metal surface and keep them off of any plastic parts to avoid plastic from melting down.

Note:
1.If they dont light after inserting into the socket,insert oppositely.
2.Does not matter which side you put to positive, however some cars have 3 wires that lead up to the bulb rather than just 2. Go to your local Audio shop to have them installed if you are not electrically savvy with a 12volt system.