Feature

●【Product Parameter】Cutting length: 24inch; Cutting thickness: 1.0mm; Cutting table size: 31.5×12.4inch; Incision width: 0.5 (mm); Cutable material: 1-5 sheets of paper, a PVC card (thick bottom 0.76MM); Weight: about 4kg/8.8lb; Product size: 31.5×3.1×12.4 inch
●【All Metal Structures】In order to improve the overall strength of the product, all metal structures are used, and the main components are made of high-strength tool steel to ensure the service life, cutting accuracy, straightness and smoothness of cutting
●【Unique Design】The hob cutter adopts an automatic paperweight design, with a self-sharpening roller blade and a sharpened lower blade, so that the hob cutter sharpens automatically and is durable
●【Exceptional Accuracy】The cutting size is accurate, convenient and fast, displayed in centimeters and inches to avoid the phenomenon of paper shifting and paper feeding. The finished product has no burrs, which cannot be achieved by ordinary cutters
●【Wide Range of Use】The paper cutter is a commonly used office supplies in photo studios, typing and copying agencies, cultural offices etc. The paper cutter can be used to accurately cut photo paper, plastic and other materials, making the binding is neat and uniform, high-end and beautiful


Description

Product description 

Size:24inch 

Parameter:

 Model: 24 inch 

Cutting: 61CM /24inch

Discretion: 2mm 

Cutting table: 80×31.5cm/31.5×12.4inch The blade is sharp, not only can you cut ten copies of the paper at a time. PVC cards are also easily cut off.

Size: 800×80×315mm (31.5×3.1×12.4in)

Weight: 4kg/8.8lb

Cautions:

1. When cutting, the knife box should be evenly applied along the direction of the guide rod, and never force in other directions.

2. After the work is finished, please park the knife box at one end of the guide rod.

3, For your safety, please do not touch the blade by hand

4, The blade generally does not need to be replaced, but when the blade is notched or deformed and the knife edge becomes dull and cannot be used, the blade needs to be replaced.

Blade replacement steps:

1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, and directly flip the knife box to the outside of the table to make the blade in the visible position, but not too strong, so as not to guide The rod is deformed.

2. Use a micro-slotted screwdriver to remove the top screw (1) from the knife box, and then use a wire cutter to gently pull the fixed shaft (8) down to remove the die (5).

3. Insert the special wrench into the hole of the die and the round nut, and rotate it counterclockwise to remove the blade.

4. When loading the knife box, the plane of the blade is close to the lower blade, and the chamfered surface of the blade should be outward.

The package includes:

1*24 inch rolling cutter