Feature
●10W High Power
●Ultra-fine Lase Engraving and Cutting
●Auto Focus in Less Than A Minute
●Camera Capture Taken to A Whole New Level
●Get Cracking while We Take Care of the Rest
Description
Step up Your Game with the Cutting-edge Laser Beam Splitters.
The 10W Laser Module is equipped with the most cutting-edge laser beam splitters, effecting a power leap from 5W to 10W. This means you can now play with a wider variety of materials and hammer out more projects.
1.6W and 10W Laser Comparison
Meanwhile, the work speed of the 10W Laser Module can be as high as 6000 mm/min, while cutting through basswoods as thick as 8 mm. To put that into perspective, the cutting speed is up to 8 times that of the 1.6W Laser Module. It can literally fulfill a laser job in a blink of an eye.
|
|
|
|
|---|---|---|
Not Just About Strength, but Finesse.With the Fast-axis Collimating (FAC) lenses embedded in the two laser diodes, the module first compresses the laser spot of each laser diodes. Then it combines the laser beams of the two laser diodes using the beam combining technology, resulting in a higher output power and an ultra-fine laser focus (0.05 mm × 0.2 mm), which allows for higher energy density. Smaller laser focus and higher power deliver high-quality laser works with impeccable details. |
Get Cracking While We Take Care of the Rest.The unique wind channel inside the 10W Laser Module provides excellent wind pressure, blowing the fumes away as the laser beam cuts into the material, sending the fumes directly into the grids of the Laser Engraving and Cutting Platform, which then get channeled out, reducing their interference on laser machining. |
Auto Focus in Seconds.No more manual material measuring. Place your material on the platform, and the module will calculate it for you. Thanks to the triangulation technique, the laser module is able to measure the thickness of the material by obtaining a few sets of data on the camera and light emitter. It will the adjust itself in Z orientation so that the focal point falls right on the material surface.You can finish focusing in a few seconds. |
|
|
|
|
|---|---|---|
A Module of Two Blowing Systems.Prolonged exposure to high temperature will reduce the lifespan of the laser diode. The 10W Laser Module has two separate blowing systems for its PCBA and its laser diode to make sure the diode is properly cooled off whenever you use it. Under proper use, the lifespan can be as long as 8,000?10,000 hours. |
Overheat Protection, Better Safe than Sorry.The module stops working automatically whenever its temperature sensor detects a higher than normal (one that exceeds 55℃/131℉) working temperature. Once the temperature falls back into the normal range, you can resume your job on the Touchscreen. |
Tailor-made Software Snapmaker Luban, Making a Pro out of Every Beginner.We not only care about user experience, we also value user success. Thats why we embarked on extensive material testing and built you a case library in Luban. It lets you access full sets of recommended parameters for common laser materials, so you can choose one and start right off. |
Expandability, as Always.
The 10W Laser Module is compatible with all models of the Snapmaker 2.0 series apart from the 150 models, and will be compatible with upcoming machines. You can use it with the addons as well, including the Rotary Module, Emergency Stop Button, Air Purifier, and CAN Hub.