Feature(may vary by option.)
●1.Package include: 7pcs Holders with inserts (Installed,as the pictures show),Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included;
●2.The holders made of quality cemented carbide and tungsten steel（40CrMo）, HRC up and down 48 degrees ， high hardness,Offer long life and faster cutting speed
●3.The inserts: carbide material with CVD coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials，the blade is sturdy, low friction coefficient, wear-proof and stable，Good wear resistance, sharp and durable ,smoothing cutting
●4. 7pcs different angles can cut out any model you want with high precision，S12M-SCLCR06 is 5.9 inches/ 150 mm; cutting angle is 95 degree, cutting direction is right hand，S12M-SCLCL06 is left hand , the dimensions as the same as the right hand, other 5pcs holders is 3.9inches/100mm, and the shank diameter is 1/2",
●5.Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc.
[B]
[Black]
Description
7pcs Turning Tool Set
- The holders made of 40CrMo, high hardness and high vibration-absorbing performance
- Each holder with 1 piece carbide inserts (Installed)
- 7pcs different angles can cut out any model you want with high precision
About the inserts
- Carbide with CVD coating
- Good wear resistance
- Smooth cutting
- Design for stainless steel .steel , Copper and aluminum
- 7pcs carbide inserts: 1pc 11ER internal threading insert/1pc WNMG431/1pc MGMN200/2pcs CCMT21.51/2pcs DCMT21.51
Product details
Dimensions of the holders
- Right hand MWLNR16126H08: length:4in, shank dia:0.63in (5/8"),with 1 piece WNMG431 Insert
- Right hand MGEHR1212-2: length:4in, shank dia:0.47in ,with 1 piece MGMN200 Insert
- Right hand SER1212H11: length:4in, shank dia:0.47in ,with 1 piece 11ER AG60 internal threading insert
- Right hand SDJCR1212H07/SDNCN1212H07: length:4in, shank dia:0.47in ,with 2 piece DCMT21.51 Inserts
- Right /left hand S12M-SCLCR/L : length:6in, shank dia:10.47in ,with 2 piece CCMT21.51 Inserts
Package
- 7 sets of external turning tools
- With water-proof plastic case ,easy to store
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| APMT1135PDER with milling holders | DCMT21.51 with indexable tool holders | MGMN200 With grooving holders | 16ER AG60 with threading holders | 9/16-20 tap & die | 16ER+16IR Threading inserts | |
| name | milling tools | Turning tools | Grooving tools | Threading tools | Tap & Die | Threading inserts |
