Feature

●CoActual technology combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
●Unique coaxial transducer integrates 6.5-inch midrange driver and 1-inch (25 mm) horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
●32-bit, 96 kHz, dual-core, active floating-point DSP provides critical Temporal Equalization with multiple FIR filters
●Acoustic-tuning controls: HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB), Acoustic Space (0 dB, -1.5 dB, -3 dB, -6 dB), high-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -12 dB/octave slope), Sensitivity (+4 dBu to -10 dBV
●180W RMS, Class D biamplification with internal heat sink; 109 dB max continuous SPL
●RF shielding, current-output limiting, and over-temperature protection

[S8 - 8 Inch LF Driver]

[S6 - 6.5 Inch LF Driver]

Description

The Sceptre S6 two-way monitor combines a 6.5-inch low/mid-frequency driver and a 1-inch (25 mm), horn-loaded, high-frequency transducer into a single coaxial unit with aligned voice coils. Nothing beats the point-source properties and symmetrical sound field of a coaxial transducer but it takes a totally new approach with built-in Coaxial Speaker Coherence Alignment and Temporal Equalization technology that employs powerful 32-bit, 96 kHz DSP to fully realize coaxial’s potential. The result is clarity and coherence that has previously only been available in ultra-high-end systems. Add 180 watt, Class D biamplification; acoustic ports; a rich set of acoustic adjustments; and full speaker protection; and you have a new, affordable monitoring standard.