DC315 Intumescent Coating Thermal & Ignition Barrier Your one step solution for Polyurethane Foam “15 Minute Thermal Barrier” and “Ignition Barrier” ratings. DC315 is a Certified Warnock Hersey listed and rated product which has passed certified testing for both the (UL- 1715) 15 minute Thermal Barrier and the NFPA 286 (AC-377 standards) as an Ignition Barrier. DC315 applies as easily as regular latex paint and being a water base cleans up in a snap. Using DC315 will satisfy code compliance on”15 Minute Thermal Barriers” and “Ignition Barriers” on your next foam job means: Large single coat spread rate UL 1715 Thermal Barrier (88.88 sq. ft./gal @ 18 mils wet and 12 mils dry) coverage rate of 1.136 gallons (4.3 L) per 100 square feet (9.3 m2) NFPA 286 (AC377) Attic Crawl Space Ignition Barrier (130 sq. ft./gal @ 12 mils wet 8 mils dry) coverage rate of .77 gallons (2.9 L) per 100 square feet (9.3 m2) Reduced labor cost, reduced material cost and higher profits Fast turnaround time Easily applied with a sprayer, brush or roller No complicated mixing- just stir the paint before application No waste Fast and easy clean up of our water based latex product, tools & equipment Will not gum up or block spray equipment Passed strict EPA – VOC and AMQD tests No formaldehyde Non Toxic, Low Vapors, Low VOCs less than 50 making DC-315 a Green Product Earn 2 LEED points for using DC-315 Two year shelf life Certified Code Compliant Coating