Feature

●These inner tie rod extensions fit between the inner shaft of the rack and the pivot where the tie rod attaches
●Used to correct steering geometry on wide frame vehicles when installing Mustang II suspension
●Includes extended length boots and bands to seal dirt and debris out of your inner tie rods
●MAN version for racks with 14mm-1.50 thread inner tie rods
●POW version for racks with 15/16-20 thread inner tie rods


Description

Inner tie rod extensions for Fits Mustang II/Thunderbird-style steering racks. Includes boots and bands.  These inner tie rod extensions fit between the inner shaft of the rack and the pivot where the tie rod attaches. It moves the pivot out to align with the pivot on the lower control arm or the imaginary line between the upper pivot and the lower control arm pivot. In doing so it leaves the tie rod in plane with the lower control arm and preserves correct steering geometry. The manual version does NOT have the holes for roll pins and Loctite is recommended. The power version is similar to the OEM and has 3 holes and include drift or roll pins for retention. Manual version (MAN) fits: Flaming River manual racks. Maval manual racks. Speedway Motors Chrome Manual racks # 910-34344. 14mm-1.50 thread. SMI Manual Rack # 910-34340-MAN. Power version (POW) fits: Fits Mustang II power racks. 1982-88 Thunderbird power racks such as # 910-35341. 15/16-20.