Feature

●XIM ELPLP68 Replacement Projector Lamp Compatible for EPSON EH-TW5900 TW5910 TW6000 TW6000W TW6100 H421A H450A H501A Powerlite Home Cinema 3010 3010e 3020 3020E V13H010L68c
●We have our own factory to produce projection lamps. You can get low-cost, high-quality projector replacement bulbs through us, it will provide your projector with a brighter and cleaner light source
●All the projector bulbs produced in our factory have been strictly tested, so you can use it with confidence
●The projector replacement lamp is very easy to install. After installation, you can enjoy the audio-visual feast
●Every lamp we sell includes our famous 150-day guarantee. If you have any questions, please contact us in time, and we will provide you with satisfactory after-sales service


Description

★Description:
-Replacement for ELPLP68/V13H010L68 Lamp Module
-100% High Quality Brand New Replacement lamp Module
-Easy to install.The quality can be guaranteed and price is competitive.

Compatible Projector Models:
For EPSON EMP-TW3800 TW5000 TW5500 TW3000 TW4000 TW2800 TW2900 TW3000 TW3200 TW3500 TW3600 TW4400 TW4500 TW5800 HD6100 HD6500 Powerlite6100 Powerlite6500 Powerlite8100 Powerlite8350
★How to install?:
1
.Gather the necessary tools, screwdriver.
2
.Turn off TV or Projector.
3
.Remove Lamp Compartment Door.
4
.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and dont get it confused with your new lamp!
5
.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6
.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7
.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8
.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9
.Youre Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.