[SHS with Laser and STH SSNH SSCF 16 ]
This fully articulating hollowing system will fit virtually any lathe with split ways, even mini lathes. All Simple Woodturning Tools can be used in the system or any other tool with a half inch tang. With the SHS Bushing, you can also use any of the mid size Simple Woodturning Tools in this hollowing system. With the laser always showing exactly where the cutter is inside your hollow form or bowl all the stress and fear of catches is eliminated. Now precise wall thickness is simple to achieve. For example if you what a 1/4 inch wall thickness simply set the laser light to shine 1/4 inch away from the cutter. Then hollow out your vessel until the laser light just falls off the outside of the vessel and you will have a 1/4 inch wall thickness. Ships with the laser and 3 tools: Simple Swan Neck Hollower - This tool is designed specifically for finishing hollow forms. Simple Shear Cutting Finisher - This tool leaves the best surface finish and is 16" long. Simple Turner and Hollower - This tool is the simplest to use. All tools have a 1/2 inch tang and can be used in this hollowing system and the Simple Interchangeable Tool Handle. Mounts on any lathe with split bed ways as shown in the demonstration videos below.