
Fine vs Ultra-Fine Filters Use the fine filters for cleaning your pool at the beginning of each season or after a storm to capture leaves and larger debris. To maintain the cleanest water possible during the swimming season, use the ultra-fine filters to remove even the finest sediment and dirt.	Goodbye, Debris! The Triton PS has superior filtering capabilities. It traps and locks-in all sorts of debris so your pool is left stunningly clean.	Dirt & Grime Doesn’t Stand a Chance The Triton PS filters 4,000 gallons of water per hour. It works with your pool filter to maintain the healthiest and clearest water possible for your pool.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Important Reminder: The power supply for your Dolphin is not waterproof- it is water resistant. Keep protected from the elements. Make sure the power supply is placed at least 10 feet from the edge of the pool. Connect the floating cable to the power supply, align the notch on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it is either stored on the caddy (sold separately) or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When your Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy (sold separately), carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Fine vs Ultra-Fine Filters

Goodbye, Debris!

Dirt & Grime Doesn’t Stand a Chance

How long can I leave my Dolphin in the pool?

How to take the robot out of the pool?

How to use the power supply

How to store/roll/operate cable

Product information