Feature

●【Wide Application】:This paper cutters and trimmers can cut all kinds of photo paper. Film, hot and cold paper, art paper jam, office paper, thin plastic soft board, rubber soft board, copper po, aluminum, pvc, etc.
●【Automatic Paper-weighting Design】: This roller cutter adopts automatic paper-weighting design, self-grinding roller blade and ground blade body, which makes the roller knife automatically sharpen and durable.
●【Premium Performance】:The phenomenon of paper transfer and paper feeding, the finished product has no burrs, the precision of the cutting, the linear performance and the smoothness of the trimming are not achieved by ordinary cutters.
●【Use Skill】: Flatten the paper to be cut under the glass ruler and prepare it on the cutting table according to the required size.The knife box is pulled from one end to the other end, and the work is completed.
●【Product Parameter】: Item type:paper cutters and trimmers. Model: 24 inch/61cm. Cutting: 61cm/24inch. Discretion: 2mm.Cutting table: 80*31.5cm.


Description

Description: 

This roller cutter adopts automatic paper-weighting design, self-grinding roller blade and ground blade body, which makes the roller knife automatically sharpen and durable. 

The cutting size in centimeters and inches is more accurate, convenient, fast, safe and practical.

Parameter: 

Model: 24 inch/61cm 

Cutting: 61CM/24inch 

Discretion: 2mm 

Cutting table: 80*31.5cm

Features: 

*Using automatic paperweight design, self-grinding roller blade makes the roller knife automatically sharpen in use and durable. 

* Cutting size is indicated in centimeters and inches. Cutting is more accurate, convenient, fast, safe and practical. 

* The phenomenon of paper transfer and paper feeding, the finished product has no burrs, the precision of the cutting, the linear performance and the smoothness of the trimming are not achieved by ordinary cutters.

Blade replacement steps: 

1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, and directly flip the knife box to the outside of the table to make the blade in the visible position, but not too strong, so as not to guide The rod is deformed. 

2. Use a micro-slotted screwdriver to remove the top screw (1) from the knife box, and then use a wire cutter to gently pull the fixed shaft (8) down to remove the die (5). 

3. Insert the special wrench into the hole of the die and the round nut, and rotate it counterclockwise to remove the blade. 

4. When loading the knife box, the plane of the blade is close to the lower blade, and the chamfered surface of the blade should be outward.

Packing list: 

1. Rotary Paper cutting trimmer; 

2. Manual; 

3. Another blade for free; 

4. Magnetic ruler.