Feature:
1. Suitable for stepper motors, servo motors.
2. Integrated with S-type acceleration with immediate stop function.
3. Reverse connection protection, overvoltage protection, overcurrent protection.
4. Onboard speed regulation and external speed regulation intelligent automatic switching.
5. Up to 20KHz pulse frequency can be output.
6. Input all optocoupler isolation, the output is a negative pulse. The input signal is active low.
Specification:
Item Type:Stepper Motor Speed Controller
Voltage Input:DC5~32V
Function Description:
1. Round-trip automatic mode: After the mode controller triggers the start (the common end and the enable input touch), the motor will automatically move back and forth between the forward limit and the reverse limit. Until the trigger stops input.
2. Single-shot touch mode: After the mode is triggered, the motor will rotate. When the motor reaches the forward limit, the motor will stop. If the motor is triggered again, it will reverse. When the reverse limit is reached, the motor stops. Trigger the start motor again and repeat the forward rotation for this cycle.
3. Single round trip mode: After the mode is triggered, the motor rotates forward. When it hits the forward limit, it stops, then starts to reverse. When the reverse limit is reached, the motor stops.
4. Jog mode: the start end and the common end are connected to the forward rotation, and the release is stopped; the connection between the stop end and the common end is reversed, and the stop is released.
Package List:
1 x Driver
1 x Users Manual(Chines-English)