Feature
●KEY FOB REPLACEMENT: Replace your lost or broken remote car key quickly and easily with the Keyless2Go remote key fob
●PROGRAMMING: If you have 2 working original keys you will be able to program these remote key from home with easy to follow instructions; key blade will require cutting by a qualified locksmith or dealer
●FITMENT: This keyless entry remote is compatible with a wide range of vehicles from Chrysle, Dodge, Jeep that use 3 Button OHT692427AA; check the vehicle fitment tool above and description for exact match.
●PART NUMBERS: This remote car key works as a replacement for remote keys with FCC ID: M3N5WY72XX
●PRE-TESTED: Each remote car key replacement comes complete with batteries and has been pre-tested to ensure quality and functionality
Description
The Best Self Programmable Replacement Key fob on the Market!
An inexpensive replacement for your original remote key fob, this Keyless2Go car key replacement is compatible with a wide range of vehicles from Chrysler, Dodge, and Jeep vehicles. Each fob key has been pre-tested to ensure functionality and that signals are transmitting properly. The keyless remote key is self-programmable if you already have 2 working original keys that start the engine. The key blade will need to be cut by a qualified locksmith or dealer. Every remote key fob comes complete with batteries and free tech support to help troubleshoot. To ensure this replacement key fob will work with your vehicle, your existing remote key must be FCC ID: OHT692427AA, OHT692713AA.
FITMENT:
2011-2014 Chrysler 200
2005-2007 Chrysler 300
2007-2009 Chrysler Aspen
2006-2010 Chrysler PT Cruiser
2007-2009 Chrysler Sebring
2008-2014 Dodge Avenger
2007-2012 Dodge Caliber
2006-2007 Dodge Charger
2005-2011 Dodge Dakota
2004-2009 Dodge Durango
2005-2007 Dodge Magnum
2007-2011 Dodge Nitro
2006-2009 Dodge Ram
2006-2007 Jeep Commander
2007-2016 Jeep Compass
2005-2007 Jeep Grand Cherokee
2008-2012 Jeep Liberty
2007-2018 Jeep Patriot
2006-2017 Jeep Wrangler
How to Program your Keyless2Go Key Fob Replacement:
1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turnignition to OFF and remove key.
2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted.
4. For each additional key you must repeat these steps starting with step number 1.