[Twotrees TTS-55 V2.0]
[Twotrees TTS-25]
[Towtrees TS2]
Q1: What is the difference between the Twotrees TTS-25 and TTS-55?
A1: TTS-25 and TTS-55 have different laser modules.
TTS-25, laser power: 2.5W, machine output power: 20W, mainly used for engraving.
(Can engrave wood, plywood, paper, kraft paper, leather, MDF, etc. Laser can cut 2mm plywood, 0.7mm leather)
TTS-55, laser power: 5.5W (compressed spot), machine output power: 40W, for engraving and cutting.
(The laser with compressed spot has stronger engraving and cutting ability, it can engrave stainless steel, cobblestone, painted metal. The laser can cut 5mm plywood, 3mm acrylic board. 0.7mm leather, etc. )
Q2: How to assemble the machine and wiring
A2: 60% pre-assembled. Customers can follow the instructions on this product page or the assembly video to complete the assembly.
Q3: What functions can be upgraded with TTS-25 and TTS-55?
A3: Thanks to the powerful 302-bit motherboard, TTS-25 and TTS-55 can upgrade vibration switch, flame sensor, air assist system, limit switch, screen operation. In addition, we also have an aluminum extrusion upgrade kit, which can upgrade the engraving area to 420*400mm or 600x600mm (Customers purchase the kit separately)
|
|
|
---|---|---|
Magnetically attached laser shieldThe magnetically attached laser shield makes removal a breeze, and the crimson case shields 98% of the laser to protect your eyes. The laser shielding shell has reserved air-assisted holes. |
Fixed focus laserThere is no need to adjust the focal length before engraving, and the focal length is only 23mm. Compared with other long-focus lasers, short-focus lasers have stronger engraving and cutting capabilities, and the laser power of fixed-focus lasers is more stable than that of zoom lasers. |
Z-axis lift designThe CNC anodized lifting device is driven by the rod shaft guide, and the laser focusing can be realized by adjusting the top knob, which is suitable for adjusting the focal length when cutting objects of different thicknesses. Of course, it can also be upgraded to other higher power laser modules |
|
|
|
---|---|---|
Cable management with bellowsThe bellows manages the direction of the cable, making it safer for the machine to move without damaging the cable. |
Y-axis dual motor driveSynchronous dual motors make the Y-axis drive smoother. (Other brands of machines that use a single motor drive will have one-sided lag when moving) The left and right Y-axis extrusion is driven by 4 POM wheels, which are quiet at high speed, light in weight and small in inertia, suitable for high-speed engraving. |
Compatible with Y-axis rotary rollerCompatible with rotary roller. Compatible with Lightburn and Lasergrbl. (Y-axis rotary roller need to be purchased separately) |
|
|
|
---|---|---|
Measurements MarkersWe added clear measurement marks to the X Y axis of the laser engraver, easy to measure the size of the item being engraved |
X-axis tensionerX-axis tensioner can adjust the tension of the belt, making the machines engraving accuracy higher and the engraved lines more clear and accurate |
Independent power switchThe motherboard has added an independent power switch, which can turn off the power in an emergency, which can reduce the damage to the motherboard caused by illegal power failure |
Twotrees TTS-25/TTS-55 supports mobile phone APP/computer offline operation, USB online operation.
1. Why cant my engraving machine connect to the computer?
A: Have you installed the CH340 driver? (There are software and drivers in the TF card in the package), the CH340 driver must be installed, otherwise it cannot be connected to the computer.
If you cannot open the files in the SD card, you can download them online, such as searching for LaserGRBL, Lightburn, CH340 drivers, etc.
You can also seek help from Twotrees service personnel (the way is in the outer box and manual)
2. How to use the App to control the engraving machine on the mobile phone?
A: Instructional videos are available on this product page. You can complete the setting according to the video.
Carving area | 300x300mm |
Machine size | 510x570x150mm |
Engraving speed | 10000mm/min |
Laser wavelength | 445±5nm |
Power supply | 12V 4A DC |
Compatible Laser Software | Lightburn, LaserGRBL, MKSLaser, etc |
Support system | Windows, Mac, Android, IOS |
Engraving method | USB/ APP/ PC offline |
File formats | NC, DXF, BMP, JPG, PNG, G-CODE, etc. |
Continuous working time | ≤24 hours |
Engraving mode | graphic engraving, file engraving, scan engraving, outline engraving, pixel engraving |
Working environment | temperature 5-40 degrees Celsius, humidity 20-60%RH |
Carving material | Wood, Paper, Leather, Bamboo, Sponge Paper, Chevron |
Packing weight | 9.2 lb |
Packing size | 20.8x8.3x7.3 inches |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Twotrees TTS-25 | Twotrees TTS-55 | Twotrees TS2 | Twotrees Air Assist Pump | Twotrees Rotary Roller | 600x600 Extension Kit | |
Laser Power | 2.5W | 5.5W | 10W | |||
Working Size | 300x300mm | 300x300mm | 450x450mm | 600x600mm | ||
Machine output power | 20W | 40W | 96W | |||
Motherboard | 32-Bit | 32-Bit | 32-Bit | |||
Engraving speed | 10000mm/min | 10000mm/min | 10000mm/min | |||
Cutting plywood thickness | ≤2mm | ≤5mm | 10mm | |||
WIFI and App control | ? | ? | ? | |||
with air assist nozzle | x | ? | ? | ? | ||
Is it compatible with air pumps? | ? | ? | ? | |||
Is it compatible with rotary roller? | ? | ? | ? |