Features:
- The baby bath thermometer can be measured. When the water temperature is too high or too low, there are sound and light alarm prompts
① When the water temperature is too high, there is red backlight flashing and sound prompt
② When the water temperature is too low, there is a blue backlight flashing and sound prompt
③ When the water temperature range is suitable, it has a green backlight and displays the timing and current water temperature
- Timing function: Put it into the water to start timing; the product leaves the water surface, pauses the timing, puts it back into the water, and the timing continues without any setting.
- Waterproof design of the whole machine
- It can be used as a water thermometer during baby bathing
- Product material: plastic, electronic components
Specification:
- Easy to switch between ℃ / ℉ units
- Temperature measurement range: 32 ~ 122℉ / 0 ~ 50℃ (below 32℉ / 0℃, it will display LL.L, above 122℉ / 50 ℃, it will display HH.H)
- Measurement accuracy: ± 33.8℉ / ± 1 ℃, resolution: 32.18℉ / 0.1℃
- High temperature prompt: higher than 102.2℉ / 39℃
- Low temperature prompt: below 96.8℉ / 36℃
- Maximum timing range: 59 minutes and 59 seconds
- Battery: Two LR44 (or AG13) button batteries, can be used for about half a year
Please Pay Attention:
1. Must be used under adult supervision
2. Please clean the two metal sensors in the bottom with shampo before using
3. There is a cicular waterproof ring in the round outlet of the movement battey.
4. Please make sure battery put back into the round groove and sealed tight. Otherwise, water will leak in.