Feature(may vary by option.)
●Diamond Drill Bit Set Various Sizes - Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit. 10 Sizes Diamond hole saw : 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm,made of high-strength carbon steel, the integrated steel structure makes these diamond drill bits more durable. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm.
●Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface. Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
●Adjustable Fixture - Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board.
●The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. Small holes-When debris gets stuck in the hole saw. We can use our screwdriver to pull it out. To provide you with the perfect experience.
●Wide Usage - This diamond-coated hole saw bit can be used to remove rings on glass, marble, tile, ceramic, PVC or other materials. When the diamond bit is working, please continue to add water to reduce the drilling speed, reduce the drilling pressure, and increase the water lubricity, which will greatly extend the life of the bit.
[Blue]
[Orange]
Description
Diamond Drill Bit Set, 16 PCS Glass Hole Saw for Tiles Glass Ceramic Marble, 6mm -- 50mm
Diamond Hole Saws:
-- Material: high quality steel, diamond dust coating
-- Color: Silver
-- Size: 6-50mm/1/4"-2" ,6mm(1/4"), 8mm(5/16"), 10mm(3/8"),12mm(1/2"),20mm(3/4"),25mm/(1"),30mm(1-1/8"),35mm(1-1/3"),40mm(1-1/2") 50mm(2")
-- Ceramic tile drill bits diameter: 6mm, 8mm, 10mm, 12mm
-- Quantity: 16 pcs
Hole Saw Guide:
-- Material: rubber base + plastic shell + steel
-- Minimum Drill Bit Dimension: 1/8"
-- Maximum Hole Saw Dimension: 3-1/4"
Two Fixing Modes Available:
-- Mode 1, Adjustable Plate Obverse Side: You can fix your hole saw with 4 bearing balls,for sizes up to 3-1/4 inches
-- Mode 2, Adjustable Plate Reverse Side: Place the plate reversely then remove one bearing ball to the bearing hole, you can fix your hole saw with 3 bearing balls,for sizes up to 1-3/4 inches
Warnings:
1.If you smell burning, back off! Either your speed is too high or the pressure youre applying is too much.Youre drill bit should never be hot to the touch, not even warm.
2.Not for use on Concrete or for depths beyond about 1/2".
3.Water is required for lubrication when drilling.
Package Includes:
-- 1 x Hole Saw Guide Jig Fixture
-- 10 x Diamond Coated Drill Bit
-- 4 x Ceramic tile drill bits
1 x Screwdriver
Warm Tips:
-- 1. Glass drill bits not suitable for concrete or concrete deeper than 1/2 inch.
-- 2. If you smell a burning odor, step back! Too fast or stressed.
-- 3. Water should be used as a lubricant and coolant when drilling, which will greatly extend the service life of the diamond tile hole saw kit.