Feature

●Total 20 sets waterproof 16-22 AWG connectors groups includes 2 pin male connectors, 2 pin female connectors, silicone rubber cable seal, conductor tabs, insulation tabs.
●Ideal for 16-22 AWG wires. The 2 pin connector could be applied for various 12v 2 pin connectors, such as cars, trucks, boats, motorcycles, trailers, scooter, quad bike, trike, caravan, marine, jet ski and other wire connections.
●These 2 pin automotive electrical connectors are made of high quality environmental-friendly materials, with high chemical stability, waterproof, dustproof and safe.
●The 2 wire harness connectors using buckle design for quick and accurate insert-contact. The high-precision copper plating tabs features high conductivity.
●Easy installation, please refer the product pictures to Assemble parts and read the tips below in the product description that should be take attention during installation.


Description

Total 20 skits 2 pin automotive electrical connectors.
The 2 wire automotive electrical connectors groups includes male connectors, female connectors, silicone rubber cable seal, conductor tabs, insulation tabs.

The automotive wire plugs apply for 16-22 AWG(1.3-0.3mm²)
Operating temperature : 14℉-176℉, -10℃-80℃
Female/male connector hole diameter: 6mm/0.24"

The quick connect 2 wire connectors could be widely applied on car, motorcycle, trailers, scooter, quad bike, truck, trike, marine, caravan, jet ski, scooter, boat, and other wire connections.

These automotive 2 pin connectors are stable, waterproof, dustproof and safe.

These conductor tabs and insulation tabs are processed by high-precision copper plating, has excellent conductivity, easy to install under soldering and crimping, stable, lightweight and no loose.

Waterproof wire harness connectors with Buckle design:
Help for quick connect and ensures a accurate and complete insertion of the contact in the housing And could be easily removed when needed.

How to use the car wire connectors :
1.Refer the product pictures to assemble parts.

2.Crimp conductor tabs to the stripped wires. Crimp insulation tabs to the insulated wires.
It is important to identify the insulation tabs, conductor tabs and wings on the terminals.
These wings work for locking the connectors. Please crimp the wings.
Dont deform the terminals , otherwise, the terminals and connectors will not be locked.

3.Insert terminals to the connectors and locked with a snap.
Pull test to make sure that if the terminals are crimpped well, Once you insert terminals right, they will not be pulled out again. If you not, they will be pulled out easily.

4.joined the female connector(red) to the male connector.
Dont put the red clip before you insert female terminals to the male connector.