Feature

●Compatible with 2001-2006 Acura MDX Base / Touring Sport Utility 4-Door 3.5L V6 (Please MATCH your vehicle model at the left top)
●OE Number: 72750S3VA03, 748-558, 135-58518L, 72750S3VA01, 72750S3VA02
●Built to meet or exceed your vehicles requirements for fitment, structural configuration, strength and torque
●Plug and Play - no wire splicing necessary (Applicable only for Power Window Regulators)
●To make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

Description

Introduction

MILLION PARTS is a brand that focuses on the auto repair area, striving to give drivers a safer driving experience. We also have advanced technical capabilities. Manufacturing and Distributing reliable auto parts. All MILLION PARTS parts will meet or exceed OE specifications, which will be an ideal choice to replace your broken parts.

Why Do Original Window Regulators Fail?

Power Window Regulator with Motor can fail for a number of reasons, including excessive wear of mechanical pieces, rust and corrosion.

In some models, poor-quality plastic parts become brittle and break, and poorly designed components bend and twist over time.

Specifications

Power/Manual: Power Window Regulator with Motor

Attachment Type: Bolt On

Configuration: With Motor

Connector: 2Pins

Operating Mode: Power

Material: ABS Plastic and Metal

Installation: Direct Replacement

Position: Rear Left, Driver Side

Replace Part Number: 748-558, 135-58518L, 72750S3VA01, 72750S3VA02, 72750S3VA03

Fitment

Replacement for 2001-2006 Acura MDX Base Sport Utility 4-Door 3.5L 3471CC V6
Replacement for 2001-2006 Acura MDX Touring Sport Utility 4-Door 3.5L 3471CC V6

Package Included: 1x Power Window Regulator with Motor

Strong lifting bracket insures efficient operation and longer durability.
Matched with the original mounting holes, properly fit.
Tested to ensure a trouble-free installation and excellent performance.

Installation method of Rear Left Driver Side glass lifter:

1. Pry open the rearview mirror triangle plate

2. Remove interior trim and switch

3. Pry open the interior trim panel from the inner corner (note: metal tools cannot be used to avoid injury to the door)

4. Remove the handrail

5. Tear off the dust film, disassemble the power connector, and remove the interior trim panel

6. Unscrew the screws that fix the lifter

7. Remove the lifter,

8. When reinstalling the lifter, you must first raise the glass to the top and stick it to the door with tape, then fix the lifter, then lower the glass and fix it on the guide rail.

9. When installing the lifter, it is the opposite of removing the lifter

Introduction

Why Do Original Window Regulators Fail?

Specifications

Fitment

Product information